Medication Management, eHealth Services and Clinical Checks at the Till (Medikationsmanagement, E-Health, CAVE, Interaktionen, Kundeninfo auf einen Blick)
1. Purpose and scope
This chapter covers the clinical-safety and patient-care side of IXOS: the checks and hints that run while a sale is captured at the till, the longitudinal medication record kept for selected patients, and the German health-network services (Telematikinfrastruktur, TI) that feed and support these functions.
Areas covered:
- Application-risk check (CAVE) at the till: compares each medicine in the sale against patient characteristics (sex, age, diseases, allergies, body weight, renal function), with traffic-light indicators, mandatory review of patient-specific risks, documentation that silences a reviewed warning, printout and a search for safer alternatives.
- Drug-drug and drug-food interaction check: general (per product) and sale/customer related (items in the basket plus the customer's dispensing history over a look-back window), severity classes, lead measures, filters, documentation and printout. Patient-individual checks also consider the patient's diseases.
- Risk-check chooser (Risiko-Check) that groups the sale- and customer-related checks.
- Counselling hints at the till: drug profiles and pictogram hints (Dr. Framm) or ABDA standard hints for the selected item.
- Customer info at a glance (KIa1B): a customer briefing panel at the till and in invoicing (profile, open tasks/questions/open items, history, CAVE status), with a reduced back-office view.
- Medication management (MM) for enrolled patients: medication courses with dosing schedules, computed stock at the patient and range (run-out date), duplicate-medication detection, stops/pauses, stock corrections, alternative dosing units, course splitting, medication overview and profile (Gantt), drug-related problem documentation (PCNE-style P/I/E codes), health behaviour and measurements with charts, counselling notes, care-home and blistering lists, and printouts (federal medication plan, own medication plan, weekly plan, range list).
- eHealth / TI module: reading the health card (eGK) at the till, emergency data, electronic medication plan consent, PIN management for patient, pharmacist and institution cards, card-terminal and institution-card troubleshooting, certificate expiry handling and card-swap wizards, connector sharing with partner pharmacies during outages, internet fallback, logs, reports, automated statutory reports to the night/emergency service fund and publishing pharmacy data to the national directory.
Users: pharmacists and pharmacy technicians at the till (checks, hints, KIa1B), pharmacists in counselling and back office (MM), staff supplying care homes (lists, weekly plans, blistering), and the pharmacy owner / IT contact (eHealth configuration, cards, outages).
2. Key concepts and terms
| German term | English | Meaning |
|---|---|---|
| CAVE / CAVE-Check | application-risk check | Check of a medicine against patient characteristics (contraindications, age/sex restrictions, allergies, weight, renal function). |
| Allgemeiner CAVE-Check | general CAVE check | Product-level list of all application risks of a finished medicine, without a patient. |
| Kundenbezogener CAVE-Check | customer-specific CAVE check | Risks that actually apply to the assigned customer's stored characteristics. |
| Erweiterter CAVE-Check | extended CAVE check | Customer setting that additionally checks body weight and renal function (and makes missing age/sex data visible). |
| Anwendungsrisiken | application risks | The individual risk entries produced by CAVE. |
| Risikomanagement (Kontakt) | risk management page | Customer contact page holding CAVE data (diseases, allergies, etc.) and the CAVE and interaction documentation. |
| Interaktion / Wechselwirkung | interaction | Drug-drug interaction (Arzneimittelinteraktion) or drug-food interaction (Nahrungsmittelinteraktion). |
| Allgemeiner Interaktionscheck | general interaction check | All interactions stored for a product or substance. |
| Kundenbezogener / verkaufsbezogener Interaktionscheck | customer/sale-related interaction check | Interactions between items in the current sale and the customer's earlier purchases. |
| Patientenindividueller Interaktionscheck | patient-individual interaction check | Interaction check that also weighs the patient's documented diseases. |
| Klassifikation / Bewertung | severity class / rating | Contraindicated, severe, moderate, minor, product-specific warning, no interaction expected, no statement possible. |
| Leitmaßnahme | lead measure | Recommended handling, e.g. avoid combination, dose adjustment, monitoring. |
| Datenlage / Quellenbewertung | state of evidence / source rating | Quality of the evidence behind an interaction. |
| Dokumentation (CAVE / Interaktion) | risk documentation | Record that a risk was clarified with doctor/patient; silences the warning for future sales of that customer, optionally until an expiry date. |
| Textbaustein | text module | Reusable reason text for documentation entries. |
| Risiko-Check | risk-check chooser | Selection list of the currently available sale/customer-related checks. |
| MediCheck Connect / MediCheck Quick | certified check engine / its till windows | External certified (EU MDR) software that performs customer-specific CAVE and interaction checks. |
| N-Ident | N-Ident authentication | One-time consent to authenticate the pharmacy (via its securPharm certificate) towards the check engine. |
| Arzneimittelprofile / Dosierungshinweise nach Dr. Framm | drug profiles and dosing hints | Paid content source giving pictogram hints (intake, pregnancy, alcohol, sunlight, driving, doping). |
| ABDA-Standardhinweise | ABDA standard hints | Standard counselling hints from the German drug database; alternative hint source at the till. |
| Kundeninfo auf einen Blick (KIa1B) | customer info at a glance | Customer briefing panel at till and invoicing. |
| Steckbrief | profile | KIa1B section with master data, infos, discounts, bonus, diseases, allergies. |
| Aufgabe / Frage / Info | task / question / info item | Standardised customer information items; tasks and questions can be recurring (Turnus). |
| Offene Posten | open items | Outstanding transactions for a customer (back-order deliveries, missing prescriptions, etc.). |
| Kundenindividueller Text | customer-individual text | Customer-specific supplement attached to a standard info/task/question. |
| Medikationsmanagement (MM) | medication management | Longitudinal medication record and counselling documentation for enrolled patients. |
| Einwilligungserklärung | consent declaration | Written consent for storing care-relevant data (MM) or for storing eMP data on the eGK (AMTS consent). |
| Medikation | medication | Use of one article over a period with a defined dosage; may have several dosing sections. |
| Medikationsverlauf (Verlauf) | medication course | Group of successive dispensings of the same therapy (same substance, strength, dosage-form structure). |
| Dosierungsabschnitt | dosing section | Time slice of a medication with one dosing scheme. |
| Verlaufsdetails | course details | Window for entering/maintaining a course: indication, therapy doctor, flags, dosage, dispensings. |
| Therapiearzt / Verordnungsarzt | therapy doctor / prescribing doctor | Doctor responsible for the therapy (mandatory, used for prescription requests) vs. the doctor on a specific prescription (research only). |
| Dauermedikation | long-term medication | Flag: taken permanently (vs. as-needed / short-term). |
| Selbstmedikation | self-medication | Flag: used without prescription; set automatically for courses created from OTC sales. |
| Reichweite | range | Date on which the patient's computed stock reaches zero. |
| Aktueller Gesamtbestand | current total stock | Computed remaining quantity at the patient across all dispensings of the course. |
| Produktionsbestand | production stock | Stock after the last weekly blister production (blistering licence). |
| Bedarfsdosierung / Freie Dosierung | as-needed / free dosing | Dosing types without stock/range computation. |
| Alternative Dosierungseinheit | alternative dosing unit | Dosing in a unit other than the pack unit (e.g. puffs). |
| Mögliche Doppelmedikation | possible duplicate medication | Parallel use of substances sharing the first 5 characters of the ABDA product group key. |
| ABDA-Warengruppenschlüssel (WGS) | ABDA product group key | Hierarchical therapeutic classification code from the German drug database. |
| Stoffnummer | substance number | Substance identifier used to compare combination products. |
| M2-Nummer | M2 number | Product-family identifier used to decide whether dispensings are "the same medication". |
| PZN | product number | German pharmaceutical article number. |
| Medikationsstopp: Pause / Abbruch | medication stop: pause / abort | Temporary interruption (extends duration) / permanent end incl. follow-up medications. |
| Bestandskorrektur | stock correction | Correction of the computed patient stock per dispensing. |
| Musterartikel / Muster eintragen | sample article / enter sample | Recording medication not sold by the pharmacy (doctor samples, other sources) or a dosage with zero packs. |
| Vorablieferung / Nachlieferung | advance delivery / back-order delivery | Dispensing before the prescription arrives / later delivery of an owed item. |
| Arzneimittelbezogenes Problem (ABP), Problemdoku | drug-related problem documentation | Problem record with P-code, I-code, E-code and status. |
| Objektiver / Subjektiver Eindruck | objective / subjective impression | MM sections: data (medication, measurements, problems, CAVE) / pharmacist's free-text notes. |
| Medikationsprofil | medication profile | Gantt-like chart of courses. |
| Medikationsübersicht | medication overview | Tabular list of all medications and courses. |
| Bundesmedikationsplan (BMP) / AMTS-Plan | federal medication plan | Nationally standardised patient medication plan with fixed layout rules. |
| Medikationsplan | medication plan | The pharmacy's own, configurable medication plan printout. |
| Wochenplan | weekly plan | Day-by-day intake plan for signing off administrations. |
| Reichweitenliste | range list | List of medications running out in a period (for follow-up prescriptions). |
| Rezeptanforderung | prescription request | Module that requests follow-up prescriptions from doctors (separate module). |
| Heimversorgung / Heimeinheit | care-home supply / home unit | Supply of care-home residents; home sub-units (wards, floors). |
| Verblisterung / Kartenblister / Box | blistering / card blister / dosing box | Patient-individual repackaging into dosing systems. |
| Telematikinfrastruktur (TI) | German health data network | Secure national network for health-care providers. |
| Konnektor | connector | Hardware/VPN gateway into the TI. |
| Kartenterminal | card terminal | Certified reader for health cards, with PIN pad. |
| eGK | electronic health card | Patient insurance card; holds insured master data (VSD), emergency data (NFD), eMP. |
| VSD | insured master data | Patient's insurance data on the eGK. |
| NFD / NFDM | emergency data / emergency data management | Doctor-stored emergency information on the eGK. |
| eMP / AMTS | electronic medication plan / medication-therapy safety data | Medication plan stored on the eGK. |
| eML | electronic medication list | Server-side list of the patient's e-prescription dispensings (patient record). |
| ePA | electronic patient record | National patient record, openable from the interaction window. |
| SMC-B | institution card | Card identifying the pharmacy in the TI; must be "verified" with a PIN. |
| SMC-K / gSMC-KT | connector card / terminal device card | Security module cards of the connector and of each card terminal. |
| eHBA | health professional card | Pharmacist's personal card; needed for qualified electronic signatures (QES). |
| QES | qualified electronic signature | Legal-grade signature applied to e-prescription changes. |
| Telematik-ID | TI identity | Pharmacy identifier in the TI; tied to the KIM e-mail address. |
| KIM | secure TI messaging | TI e-mail service; also carries automatic system tasks. |
| IXOS.Routing | connector sharing | Use of a partner pharmacy's connector during an own connector outage. |
| IXOS.Backup Pro | e-prescription resilience concept | Vendor bundle of fallback measures (routing, internet fallback). |
| NNF (Nacht- und Notdienstfonds) | night and emergency service fund | Fund receiving monthly reports (TI usage, private Rx packs). |
| IK | institution identifier | Billing identifier of the pharmacy. |
| gematik Verzeichnisdienst | national directory | Directory of providers used by patient and insurer apps. |
| Notes-Aufgabe | system task | Task in the system's notes/task module, created automatically for due actions. |
3. Data model
The help describes behaviour rather than tables; the entities below are inferred from the fields and rules it names.
3.1 Customer clinical profile (on the contact)
- CAVE data (contact page Risk management, CAVE data): sex, birth date (age), diseases (coded), allergies (coded), body weight, renal function / creatinine, flags such as pregnant / breastfeeding (appear on the federal plan header), CAVE-check active flag, extended-CAVE-check flag. Walk-in customers and business customers cannot have CAVE checks.
- CAVE documentation (tab CAVE-Dokumentation): per customer + risk: reason (free text or text module), optional expiry date, editor, timestamp. Status effectively active (warning silenced, shown blue) or expired (warning blinks again; record kept and can be reactivated by editing). Deletable.
- Interaction documentation (tab Interaktion Dokumentation): per customer + interaction (interaction number, tied to the active substances; dosage form / strength recorded so a record for another form/strength of the same interaction number can be detected and adopted): reason, optional expiry, editor, timestamp. Same active/expired behaviour.
- Text modules for reasons: user-maintained list.
- Consent declarations: (a) MM consent: "consent to data storage handed out on <date>" (written, countersigned); (b) AMTS consent for eMP on eGK: date, name/address of provider where given, stored in the system and on the card.
- MM enrolment: MM flag, general care data (sex, age, care-home membership, treating doctors, GP/Hausarzt), option "print federal medication plan after each sale".
- Health behaviour: smoker, healthy diet, physically active (lists), creatinine value, other (free text).
- Measurements (each with date + time): body measures (height, weight, BMI computed); blood pressure (systolic, diastolic, pulse); blood glucose; blood lipids (total cholesterol, HDL, LDL, triglycerides).
- Counselling note (subjective impression): date, time, employee, subject, free text.
- Drug-related problem: finished medicine, P-code (problem), I-code (intervention), notes, E-code (result) and result remarks, status recorded -> in progress -> closed, processing history.
3.2 Medication course structure
- Course (Medikationsverlauf): customer; course-forming article/PZN (substance, strength, dosage form); indication (free text); info text; therapy doctor (mandatory; with phone); intake relative to meal (before / with / after); long-term flag (mandatory yes/no); blister article flag; self-medication flag; stops (references); prescription-request rule state (automatic / excluded until date / force include in next request / currently on a request); drug-related problem markers (open / closed). Derived: therapy start, current total stock, production stock, range, number of medications.
- Medication (Medikation, one article use within the course): article, M2 number, dispensing details; dosing sections.
- Dosing section (Dosierungsabschnitt): valid from / to (date + time; end computed; last one open-ended); dosing unit (factor + unit) and optional alternative unit (factor + unit); dosing type (daily, as-needed with optional single dose and max daily dose, free text, weekly cycle, monthly cycle, 2-4-week cycle, 2-31-day cycle); time mode (times of day: up to 5; clock times: up to 10) with quantities per slot; changed-on, changed-by.
- Dispensing / goods entry (per article delivered into the course): sale type (normal sale, statutory prescription, private prescription, green prescription, narcotic prescription, care aids, cancelled variants, special procurement, advance delivery, back-order delivery, sample entry); booking timestamp; dispensed quantity (packs x pack size); number of packs; rest (still to be taken); rest in alternative unit; "do not use remaining stock" flag; prescribing doctor (with phone; not inherited); batch; expiry; stock-correction history.
- Stock correction: dispensing reference; from value (current rest), to value; reason; capture timestamp (when counted; may be in the past).
- Medication stop: type (pause / abort incl. follow-up medications); start date-time; end date-time (pause only); reason (list incl. medication change, intolerance, inpatient stay; default inpatient stay); remark; created/changed by and at; list of courses covered (one or many).
- Alternative unit definition: pack unit / manufacturer-reported alternative / own alternative (quantity + unit).
3.3 Interaction and CAVE result objects
- Interaction hit: partner 1 (finished product + dosage form, or triggering substance / substance group, or food + food group); partner 2; direction (unidirectional, bidirectional, undirected); classification; state of evidence; lead measure; source rating; documentation marker (exact / other form or strength); for customer-related hits: date of most recent sale of the partner within the look-back window and branch code if dispensed at a connected branch. Detail content: summary, warning (partners and direction, rating-relevant patient characteristics, affected substances, rating, lead measure, source rating, short pharmacological effect, side effects, possible symptoms, important notes, measures, risk factors), individual factors, monitoring parameters, expert knowledge (pharmacological plausibility, data basis, effect, mechanism, database interaction number, literature).
- CAVE risk: risk type (age, sex, disease, allergy, body weight, renal function), colour (yellow atypical, orange restriction / cross-allergy, red action mandatory, blue documented), note text, documentation.
3.4 Customer-info-at-a-glance objects
- Info items (standardised, with priority; high priority shown bold), tasks (type A) and questions (type F) with priority (mandatory, high, normal), optional recurrence cycle, optional customer-individual text, flags "relevant for back-office view"; predefined answers for questions; campaign tasks/questions.
- Message texts (Meldungstexte; option "pop up at till"; time-controlled possible; a Faktura message text exists), info texts, hints, delivery note/hint.
- Notes (customer-specific, free text, dated).
- History entries: prescription sales, normal sales, completed tasks / answered questions, notes, app contacts, e-mail contacts.
- Linked: personalised discount coupons, bonus account balance, classifications (e.g. VIP), family relationships.
3.5 eHealth / TI objects
- Workstation-to-connector and card-terminal assignments (system parameter page "Gematik Konnektor").
- Cards with status and certificate expiry: SMC-B (status: verified / not yet verified / locked / not present / connection to connector interrupted), SMC-K, gSMC-KT per terminal, eHBA.
- Routing partners (cooperation pharmacies) with data-processing agreement; counter of routed e-prescriptions; terminal-redirection state per terminal (redirected to which partner / not possible + reason).
- Protocol entries: date, action label, origin (IXOS, connector, NNF, gematik), workstation / terminal, operator, category (success / error), details.
- NNF reports: monthly TI usage report status/date; monthly private-Rx dataset status for the last 3 months.
- Directory data: opening hours, holidays, emergency duty, contact data, offered services, directions; last transfer date; transfer flag.
4. Features
4A. Clinical checks and hints at the till
4.1 Risk indicators in the till and total windows [GENERIC]
- Purpose: keep the clinical risk state of the current sale permanently visible, and force a review of patient-specific risks before the sale is closed.
- Indicators: three permanent indicators in the till (sale) window and in the total (payment) window: CAVE, drug interactions, food interactions. CAVE is internally one indicator per risk category: sex, age, diseases, allergies, body weight, renal function.
- CAVE indicator states (till):
- light grey: no risk / nothing stored;
- black without ring: general (product-level) risks exist;
- black with coloured ring: customer-specific risk; ring colour = most severe category;
- black with blue ring: all risks have been documented (warning silenced);
- black with question mark (only for age and sex, only when the extended CAVE check is on): the check cannot be done because the customer data are missing.
- CAVE indicator states (total window): light grey none; coloured or black = risk present; blue = documented; black with "?" = check impossible for missing data.
- Interaction indicator states (till): light grey = none; black = at least one general interaction exists for a captured product (click shows general interactions); black with coloured ring (drug interactions only) = interaction between two medicines of the sale, or, with a customer assigned, between a sale item and an item from the customer's history; ring colour = highest customer-related severity; blue = documented. Business customers: no drug interaction check (greyed icon with a cross).
- Blinking rule: a customer/sale-specific risk (CAVE or interaction) blinks until it has been opened and reviewed; clicking opens the relevant check and stops the blinking. Blinking of interaction rings is an amplification controlled by parameter "Interaktions-Icons blinkend anzeigen".
- Forced review: if a blinking (unreviewed) risk remains when the user switches to the total window, the CAVE risk list / interaction window opens automatically before the sale can be closed. Recommended practice: capture all items first, then review.
- Regulatory note: because of the EU Medical Device Regulation, customer-specific CAVE and interaction checks are executed by a connected certified product ("MediCheck Connect"). Before first use the pharmacy gives a one-time consent to "N-Ident" authentication based on its securPharm certificate (company master data, page securPharm).
4.2 Risk-check chooser (Risiko-Check) [GENERIC]
- Purpose: one entry point for all currently applicable sale- or customer-related checks.
- Trigger: function in the sale; also from a customer's sales data (Verkaufsdaten) in contact management.
- Entries: "CAVE (kundenbezogen)", "MediCheck Quick - Interaktionen", "Interaktion Nahrungsmittel" — only those currently available are listed.
- Prerequisite for customer CAVE: CAVE data stored on the contact (Risk management, CAVE data).
4.3 General CAVE check (Allgemeiner CAVE-Check) [GENERIC]
- Purpose: show all application risks of a finished medicine regardless of patient.
- Trigger: article info (drug database) list -> "CAVE allgemein", or click on the CAVE indicator when it is black without ring.
- Behaviour: overview "application risks - total overview" with one row per risk and its risk type; a lower pane shows the note text for the selected risk. Category icons in the header act as filters (age, sex, disease, allergy, body weight, renal function; "overview" returns to all). User can page between articles of the sale (several items in the subtotal). Print and comparison search are available.
- Colour semantics: yellow = atypical medication; orange = restriction of use, must be checked/clarified individually before dispensing (orange on allergy = cross-reaction); red = action mandatory (e.g. no indication/use for this sex, or a matching allergy); blue = risk documented and discussed with the customer.
- Incomplete-data signal: when the extended CAVE check is active for the customer but body weight or renal function is not stored, the icon carries a warning triangle with a tooltip explaining what is missing.
4.4 Customer-specific CAVE check (Kundenbezogener CAVE-Check) [GENERIC]
- Purpose: show only the risks that apply to the assigned customer's characteristics.
- Trigger: runs automatically when a customer is assigned to the sale; manually via the risk-check chooser -> "CAVE (kundenbezogen)" (window "MediCheck Quick - CAVE", "application risks - total overview (customer-specific)"); from MM medication overview and MM analysis; in invoicing (Faktura) the same way.
- Window content: header with customer name, sex, and icons "customer is cared for in medication management" and "electronic medication list (eML) can be opened"; category filter icons; list of risks coloured red (action mandatory) or orange (must be checked). Per risk: tab "Doku" (whether documentation exists: editor, timestamp, reason, expiry) and tab "Hinweis" (general information).
- Invoicing: user may still proceed with "create delivery notes" despite risks.
- Viewing documentation: stored on the contact (Risk management, CAVE documentation); function "Kunde Doku." opens it.
4.5 CAVE documentation [GENERIC]
- Purpose: after clarifying a risk with doctor and patient, silence the warning for future sales of this customer.
- Inputs: reason (free text or a text module ticked from a user-maintained list; new text modules can be created), optional expiry date (e.g. for a temporary illness).
- Behaviour: documented risks show a blue ring instead of blinking colours. When the expiry date passes, the warning blinks again; the record still exists and can be reactivated by editing it (new expiry or removing the expiry). Records can be deleted.
- Header of the window: customer name (switchable when subtotals belong to different customers; "Keine Kundenzuordnung" if none), birth date, sex, MM icon.
4.6 CAVE printout [GENERIC]
- Inputs: customer name; option to include the customer's CAVE data; choice "overview" or "details"; details either only the selected risk or all risks filtered by categories (age, sex, body weight, renal function, disease, allergy, synonyms, substances); grouping by risk type or by medicine. Risks found in the check are pre-ticked. Print preview, then print or send.
4.7 Comparison search from CAVE (Vergleichssuche) [GENERIC]
- Purpose: find alternative finished medicines with the same properties as the current one but without the patient's risk.
- Modes: quick search (Schnellsuche), or search by criteria (Suche anhand Vorgaben) with tab "Arzneimittel" (adjustable product criteria) and tab "CAVE" (patient-individual risk factors); a marker "Patientendaten vorhanden" shows patient data are available.
- Options: "immediately with price-list data" (skip the intermediate hit list and show article hits directly); "same pack unit".
- Limitation (stated): risks from body weight and renal function are currently not considered by the criteria-based comparison search.
4.8 General interaction check (Allgemeiner Interaktionscheck) [GENERIC]
- Purpose: list all interactions stored for a product or substance.
- Trigger: click on a black interaction indicator; article info list; customer's sales data in contact details. If an item is selected first, its interactions are shown directly; paging through articles; "all articles with interactions" view.
- Table: one three-line entry per interaction, sorted by severity descending; identical interactions are merged into one hit and shown per substance group. Columns: partner 1; classification (colour-coded short label, direction arrows: "<<" unidirectional, "<>" bidirectional, none when undirected; plus state of evidence and lead measure); partner 2; documentation marker (exact match, or documentation exists for another dosage form / strength with the same interaction number; not used for food interactions). Header shows hit count and whether filters are applied.
- Severity classes:
- Contraindicated — must not be combined.
- Severe — potentially life-threatening or serious, possibly irreversible consequences.
- Moderate — therapeutically relevant consequences.
- Minor — no compelling therapeutic consequences; may need monitoring.
- Product-specific warning — only manufacturer warnings exist (usually the SmPC); grey ring, detail view in relevance colour.
- No interaction expected — literature indicates none, or none expected from structure / pharmacokinetics / pharmacodynamics; grey ring.
- No statement possible — no evaluation in literature; grey ring.
- Lead measures: avoid combination; combination not recommended; dose adjustment; adjustment; time-shifted administration; monitoring; watch for sufficient effect; watch for increased adverse reactions; watch for altered effect; usually no action needed.
- Detail tabs: Summary (texts from the check provider; provider contact via "labelling" function); Warning; Individual factors (only for patient-individual check); Monitoring (parameters to measure); Expert knowledge. Contents as listed in 3.3.
4.9 Sale/customer-related interaction check (Kundenbezogener Interaktionscheck) [GENERIC]
- Purpose: detect interactions between items being dispensed now and with the customer's current medication.
- Scope of comparison: all captured items compared with each other across all subtotals of the sale. With a known customer additionally: items from the customer card (earlier sales), sales data from connected branch pharmacies and partner pharmacies, the sales history from the electronic medication list (eML), and active entries of the electronic medication plan (eMP).
- Look-back window: default 100 days; parameter "Anzahl Tage Prüfung" (till settings, system scope, page Interaktionen), 1-999 days.
- Trigger: blinking icon -> click, or risk-check chooser -> "MediCheck Quick - Interaktionen"; auto-open on switching to total if unreviewed.
- Window: header with customer name (or "Keine Kundenzuordnung"), birth date, sex, icons (MM care, eML/eMP openable, diseases considered); hit count and filter state. Customer-related hits are listed individually (not merged). For each hit the date of the most recent sale in the look-back window and, if dispensed at a connected branch, the branch code.
- Multiple customers / ambiguous assignment: when subtotals belong to different customers the user pages between customers. When an interaction links items from subtotals with and without a customer, a banner shows the number of hits and how many involve partners without customer assignment; the user must verify the items are for the same person. A notice "hits with interaction partners of other customers" leads to the related hit. Controlled by parameter "Kundenbezogene Interaktionen mit 'Kunde fehlt'" (till, workstation, page Hints/Prompts), default on.
- Assign patient characteristics (Pat.merkmale zuordnen): during counselling add further diseases to be considered; prerequisite: customer assigned and at least one interaction.
- Open ePA: the patient's electronic record can be opened from the window.
- Invoicing (Faktura): results are shown; if not reviewed, the window pops up when the order is finished ("create delivery notes" / "create without delivery note"); the user may proceed anyway. Auto-popup can be suppressed by parameter "Kundenbezogene Risiko-Checks durchführen" (Faktura settings, workstation, page Allgemeines zum Abverkauf).
- Documentation: stored on the contact (Risk management, tab Interaktion Dokumentation); "Kunde Doku." to view; "Doku. bearbeiten" to create.
4.10 Patient-individual interaction check [GENERIC]
- Possible for customers who are in MM, have the CAVE check activated and at least one documented disease (as completely coded as possible). A header icon shows that diseases were included. Tabs Summary and Individual factors show the patient characteristics; Individual factors also shows risk factors and the diseases they affect.
4.11 Food interactions (Nahrungsmittelinteraktionen) [GENERIC]
- Same table and detail tabs as drug interactions; partner shown as food and its food group.
- General: indicator turns black when documented food interactions exist; open via article info -> "Interaktion Nahrungsmittel" or clicking the icon; "all articles with food interactions" view.
- Sale/customer related: risk-check chooser -> "Interaktion Nahrungsmittel". No or one customer: all food interactions listed together; several customers in the subtotals: listed per customer, user pages between them.
- Also available from drug database research.
- Quick toggle between drug and food interaction views when both exist.
4.12 Interaction filter settings [GENERIC]
- Filter by rating (classification), lead measure, source rating via checkboxes. Applies only to the running check; resets to default on next opening.
4.13 Interaction documentation [GENERIC]
- After clarifying with doctor and patient, the warning is deactivated for future sales for this customer and these active substances; shown with a blue ring.
- Reason (free text or text module) + optional expiry; after expiry the warning blinks again; reactivation by editing; deletion possible.
- A reason documented for the same interaction number but a different dosage form or strength for the same customer can be adopted.
4.14 Interaction printout [GENERIC]
- Fields: customer name (prefilled from the sale; empty when started from drug database or article management, can be typed); doctor name when the printout is addressed to a doctor; customer's diseases (if MM active); overview; only the selected / all interactions; info blocks to include (summary, warning, individual factors, monitoring, expert knowledge); number of copies; "select all". For partners from earlier purchases the sale date is printed. The help warns that full printouts can be very long.
4.15 Counselling hints at the till: Dr. Framm profiles and ABDA standard hints [GENERIC] (content source [DE-SPECIFIC])
- Purpose: remind staff of key counselling points for the selected item.
- Display: when an item is captured, symbols plus a hint text for the selected item appear in the till's info area. Hover = tooltip; click opens the detailed drug profile module (Arzneimittelprofile), also reachable via article info.
- Source selection: parameter "Anzeige" (till settings, workstation scope, page Hinweistexte): default Framm dosing hints; alternative ABDA standard hints.
- Framm pictograms (paid add-on): counselling text exists (only shown when no other symbol applies); take with plenty of liquid; take 0.5-1 h before or between main meals; take with or directly after a main meal (meal timing hints are not absolute; galenic form may change them); keep the prescribed dosing interval; not in pregnancy or breastfeeding; not in 1st trimester and breastfeeding; not in 3rd trimester and breastfeeding; not in 1st and 3rd trimester and breastfeeding; not in 2nd and 3rd trimester and breastfeeding; not during breastfeeding; alcohol may impair effect or cause intolerance; avoid sunlight/UV; ability to drive / operate machines may be impaired; substance banned under the international anti-doping convention.
- ABDA standard hints: shown for the marked or last captured item. Because there are many, the set shown is restricted in the drug-database module settings (page Standardhinweise); a vendor preselection ships and can be restored.
- Underlying idea: a curated, configurable set of counselling pictograms/hints per product, shown at the point of sale.
4B. Customer info at a glance (Kundeninfo auf einen Blick, KIa1B) [GENERIC]
4.16 Panel overview
- Purpose: brief the employee on everything relevant about the customer at the moment of service; it is not a clinical check. Part of licence package "IXOS.Kunde".
- Where: till and invoicing (Faktura); opened manually from the sale, the prescription scan / e-prescription dialog, contact management, Faktura; can pop up automatically on customer assignment.
- Areas: profile (Steckbrief), icon area, open tasks area, history area. Tasks or history area can be hidden.
- Icon area: CAVE button shows whether the CAVE check is activated, deactivated or impossible (walk-in or business customers); clicking jumps to the contact's risk management page to activate CAVE and capture allergies/diseases. Additional info (service preferences): customer is allowed invoice purchase (Faktura); Faktura is the preferred payment; cared-for customer.
- Profile (collapsible tree): master data (name, birth date, address, contact data, flag for foreign address, walk-in marker); new-customer status; delivery hint (from contact's specific data; edit/delete inline); message texts, info texts, hints (editable); assigned standardised info items, optionally with customer-individual text (manually assigned ones can be removed); high-priority infos in bold; redeemable personalised discount coupons (also of family members); bonus account balance (if a customer-linked bonus model is active); contact / customer classifications (e.g. VIP); diseases (alphabetical); allergies (alphabetical).
- Open tasks area: open tasks (type A) and questions (type F), sorted by priority (mandatory, high, normal) and type descending; open campaign tasks/questions; open items (high priority, shown before tasks; back-order deliveries and missing prescriptions up to three individual lines each, all other types as one summary line; requires parameter "Offene Posten aufblenden"). Row actions: complete task, answer question, skip cycle; take the transaction to the till; take an article to Faktura; release a pickup order from storage / return it; open the open-items view. Search field; checkbox "incl. family members" (shows family members' open items, infos, tasks, questions; in branch/partner pharmacies only those of exchanged family members); create note; assign existing info/task/question.
- History: all sales, task/question interactions, notes, in descending date order; "from" date defaults to 24 months back. Entry types: prescription sales, normal sales (article can be re-taken to the till), completed tasks / answered questions (undo sets them open again), notes (editable), contact via the pharmacy's customer app, e-mail contact. Entries expand to show sale details, the answer given or the note text. Filters: expand/collapse all, search, type toggles (prescription sales, normal sales, info/tasks, customer communication; toggle shown coloured when entries exist and marked when the filter is active), from-date.
- Family: jump to family details and switch to another member's panel; when taking an article from history to the till the user is asked whether to create a new subtotal.
4.17 Tasks, questions, infos, notes, individual texts
- Complete task / answer question / skip cycle: a task is marked done, or for recurring tasks the current cycle can be skipped (Turnus überspringen). A question is answered with a predefined answer or free text and is then done; recurring questions can skip a cycle.
- Manage customer infos (window Informationstexte): assign / unassign infos, tasks and questions; set done / answer; create, edit, delete customer-individual texts; create, edit, delete notes; edit/delete hint, message texts and info text. Once KIa1B is activated, hint, message text and info text are only shown if present.
- Notes: customer-specific free text, shown in history; create, edit, delete.
- Customer-individual texts: supplement a standardised info/task/question for one customer; shown under the item in profile or open tasks; a pen marker shows one exists; text modules are available and are managed per info icon.
4.18 Back-office view
- Reduced view for workflows that do not need everything. Can be set per workstation as default view, or as default for care-home customers; it is the default when the panel pops up automatically in the e-prescription dialog or prescription scan.
- Shows: open items (parameter-dependent; not in e-prescription dialog / prescription scan); open tasks and questions flagged "relevant for back-office view"; infos flagged likewise; message texts with "pop up at till" ticked.
- When it appears: depending on workstation parameter "Kundeninfo auf einen Blick"; in the e-prescription dialog / prescription scan regardless of the parameter, on auto-popup, when a message text exists or at least one item is flagged for the back-office view; in Faktura regardless of the parameter, on auto-popup, when a Faktura message text or a flagged item exists. The user can switch to the normal view at any time.
4C. Medication management (Medikationsmanagement, MM)
MM is a paid add-on. Within the TI context (reading/editing the federal medication plan in electronic or paper form, eMP and BMP) a restricted scope is available without the licence; editing the eMP needs no MM licence. CAVE inside MM is a separate paid module.
4.19 Enrolment and consent [GENERIC]
- Trigger: contact data, page "Medikationsmanagement": tick the MM checkbox; also record general care data (sex, age, care-home membership, treating doctors).
- Consent rule: care/medication data may only be stored after written consent. If none is on file, the consent window opens: under care-relevant data tick "consent to data storage handed out on <date>", print the MM consent form and have the customer countersign.
- Effect: enables the MM (handshake) icon and "advanced functions", which open the MM overview.
- Access paths: contact -> MM page -> advanced; contact handshake icon -> medication plan window -> advanced; till with a cared-for customer -> handshake icon -> "Kunde: Medikationsplan" -> advanced.
- Scope of MM: record of purchased and pre-delivered articles with quantity, dosage and administration scheme; capture and evaluation of measurements; record of communication and personal impression.
4.20 MM overview and sections [GENERIC]
- Overview page: MM data (sex, birth date, GP); activities (date of last and next planned counselling; open customer problems documented in objective impression); allergies and diseases (read from CAVE data); drug-related problems (from problem documentation; closed ones no longer counted).
- Sections: Overview; Objective impression (tabs: medication overview, medication profile, problem documentation, behaviour/measurements, CAVE — the CAVE tab mirrors the customer's CAVE entry); Subjective impression; Analysis; Plan; Home/blistering.
4.21 Course details (Verlaufsdetails) [GENERIC]
- Purpose: record each dispensing into a medication course with its dosage so the system can compute stock at the patient and the run-out date.
- Automatic trigger: opens at every dispensing, back-order delivery capture, sample article and advance delivery in a sale, when a customer is assigned and enrolled in MM. All medicines except veterinary ones are considered, including those outside the pharmacy-only assortment (product group key starting "A"), notably homeopathics.
- Other triggers: MM medication overview -> Details; "enter sample"; customer sales data -> "book medication" or "enter sample".
- Suppression: parameter "Med.-Details bei gleicher Medikation ausblenden" hides the window when a follow-up prescription with the same PZN or same M2 number as the last booked item is dispensed.
- Ordering rule: if a same or similar article already has a medication, the possible duplicate medication window (4.22) always comes first. Cancelling either window means the article is not booked as medication/follow-up and must be booked later.
- Auto-calculation: if a standard dosage is stored, the system proposes start/end and stock. Dispensing date and dosage are printed on customer and care-home labels. A medication can be saved provisionally without dosage.
- Header: customer surname + first-name initial, substance, strength, selector to page through the customer's other medications.
- Course fields: see 3.2. Rules per field:
- Indication: as stated by the doctor; keep it generic (e.g. "pain") so it does not need to change; becomes the "reason" column of the federal plan.
- Info text: free text on intake; printable.
- Therapy doctor: mandatory; GP from the contact is adopted automatically; shown in overview and printouts; prescription requests go to this doctor.
- Intake relative to meal: functional only for blister customers, otherwise informational.
- Therapy start: markers "!" (course not yet started), "article not yet dispensed", "dispensed but no dosage"; tooltip shows exact time.
- Range: date when total stock reaches 0 (tooltip: time).
- Current total stock: sum over all dispensings excluding those flagged "do not use remaining stock"; for blister customers negative stock shown red when blisters were produced in advance; alternative unit shown only if defined.
- Production stock: only with blister-management licence; stock after the last weekly blister production; negative red if produced in advance.
- Long-term flag (mandatory yes/no): long-term = permanent (e.g. antihypertensives) vs. as-needed/short-term (e.g. antibiotics). Effects: used for prescription requests; appears on all dosing printouts (medication plan, weekly plan, federal plan) even without stock, whereas non-long-term medications disappear after their range ends; appears in overview / plan even if the stock ran out before the filter period, then highlighted red. A prompt reminds the user if it is not set.
- Self-medication flag: set automatically when a new course is created from a normal (OTC) sale.
- Dosage entry (tab entry/maintenance), one section at a time:
- Dosing unit: factor + unit of the course-forming unit and of an alternative unit; an indicator shows the manufacturer reported an alternative unit.
- Dosing types: daily; as-needed (optional single dose and max daily dose; no stock/range computation); free (text such as "1-2 tablets in the morning"; no stock/range computation); weekly cycle; monthly cycle; 2-, 3-, 4-week cycles; 2- to 31-day cycles.
- Time modes: times of day, up to 5 administrations (fasting 06:00, morning 08:00, noon 12:00, evening 18:00, night 21:00); clock times, up to 10 administrations, 7 preset (06:00, 08:00, 10:00, 12:00, 15:00, 18:00, 21:00), editable.
- "Valid from" sets the start of the section; the end is computed; the last section is always open-ended. Sections: new, delete, edit (needs edit mode), navigate, counter n/total; changed-on and editor recorded. Tab overview lists all sections.
- "New dosage" adds a section and leaves earlier ones unchanged; "edit dosage" changes the section retroactively and stock and range are recalculated.
- Article info (goods) area: articles dispensed into the course with remaining stock, start and end of intake, sale-type icon (tooltip = booking time), rest. Per dispensing: dispensed quantity (e.g. 2 packs x 100 = 200), number of packs, rest, "correct remaining stock" (not possible once rest = 0), rest in alternative unit, "do not use remaining stock" (abort at medication level: rest set to 0.00 and excluded from the course total; use case: patient switches manufacturer because of an excipient intolerance and the old stock must not be counted), prescribing doctor (from the sale or sample entry, never inherited from the predecessor, printed nowhere, research only), batch and expiry (should be filled for courses with blister articles for manual blistering). Delete medication (selected dispensing). The area can be hidden to see multi-level dosing.
- Dosage without dispensing: a prescribed dosage can be stored via sample entry with 0 packs before any sale; or a medication can be booked at sale without dosage and the dosage added later. If the medicine was already dispensed, set the date to the dispensing date so it becomes therapy start and the basis of stock computation; after booking a sample entry the dispensing time / therapy start cannot be backdated. Courses without an article show unknown stock "?". Procedure for dosage only: enter sample with 0 packs, enter dosage, delete the article row; the overview then shows substance, strength, dosage form and dosage only.
- Sale cancellation / customer change: the article is removed from the customer's medication data, but the course, dosage and flags remain; the user should adapt the dosage for the original customer. Warnings appear when cancelling/editing a sale in sales management or Faktura that contains MM-booked articles, when deleting an item already taken into MM in the same sale, and when clearing the pickup of a back-order in open items with MM-booked articles.
4.22 Possible duplicate medication (Mögliche Doppelmedikation) [GENERIC] (classification key [DE-SPECIFIC])
- When: for MM customers at dispensing in a sale and when booking sample medications. (For non-MM customers a separate optional hint on possible duplicate/follow-up medication within a period exists — documented elsewhere.)
- Rule: a duplicate exists when the patient takes in parallel two or more substances whose ABDA product group keys match in the first 5 characters. Combination products are compared by substance number.
- Window: header = article being booked; table of existing courses with the same substance: therapy start, substance, strength, long-term icon, stop marker, drug-related problem icon (open / closed / red if both), dosage short form, current stock or "?", range, product group key. Stock is "?" when the course mixes dosage forms, or mixes M2 numbers without carrying over the predecessor's rest, or uses as-needed/free dosing. Details pane compares new vs. selected: name, dosage form, unit, substance, strength, dosing unit, group key.
- Options: (a) start the new article at a chosen date/time and abort the selected medication(s); (b) use up the selected medication(s) first (they are then stopped) and then continue with the new article — start after the longest range if several; (c) accept all (parallel use; therapy safety confirmed). Confirming without an option gives a notice.
- Modified release: booking medications differing in release type (e.g. retard vs. non-retard) also opens the window; products with delayed / differentiated / constant release show a comparison line "release: controlled". Usually dosed differently; the user decides (e.g. accept both in parallel); ranges and stocks are computed accordingly and both appear on blister/medication plans and in prescription-request lists.
- Combination products: e.g. bisoprolol 5 mg followed by bisoprolol/HCT 5/12.5 is offered as possible duplicate. Not a duplicate when two combination products are identical in composition (all substances and strengths equal and same product group) — they stay in one course.
- Alternative unit carry-over: if the predecessor with the same PZN was dosed in an alternative unit, a notice lets the user decide whether to keep it.
4.23 Alternative dosing unit (Einheit definieren) [GENERIC]
- Use when the doctor prescribes in a unit other than the pack unit (e.g. puffs of an inhaler) and the manufacturer reported an alternative unit.
- Options: pack unit; manufacturer-reported alternative unit; own alternative unit (quantity + unit as prescribed).
- After dispensing, stock is shown in the alternative unit; after the medication starts, the pack is scaled down proportionally and the remaining count is shown. For blistered medications the alternative unit is passed to the blistering module and printed on its forms.
4.24 Split course (Verlauf auftrennen) [GENERIC]
- Auto-grouping rule: articles with the same substance, strength and dosage-form structure (per drug database) are booked into one course automatically.
- When the same substance is used in combination with different dosing (example: Madopar LT and levodopa 100 mg landing in one course), the course can be split; each course into at most two.
- Dialog: choose the article to separate, enter the quantity to book into the new course, then complete the sale. Enter the dosage for the new course afterwards via Details and reprint the (federal) medication plan.
4.25 Medication stop (Medikationsstopp) [GENERIC]
- Purpose: record intolerance, hospital admission, therapy change.
- Types: pause (temporary; the medication's duration is extended by the pause length) and abort including follow-up medications (permanent).
- Scope: one stop can cover one or several courses. Stops are also created by the duplicate-medication options (immediate abort, or after using up).
- Fields: see 3.2; reason default = inpatient stay. Table configurable (e.g. show creator and creation time).
- Create: from medication overview (tick the medications) or course details: add stop -> choose courses -> type, start, (end), reason, remark -> save. If an abort is set for a time when no stock is available, the system shows the intake start/end for information.
- Automation: parameter "Info bei Med.-Abbruch Grund 'station. Aufenthalt'": recording an abort with reason inpatient stay automatically creates a message text / KIA info for the customer.
- Edit: change type/dates/reason; add a course; remove a course (it is then not stopped); delete the stop (all medications continue).
4.26 Stock correction (Bestandskorrektur) [GENERIC]
- When the actual stock at the patient differs from the computed one; per dispensing in course details.
- Not possible once the pack is used up. Can add back at most what was previously deducted from that pack (a lost blister of 10 cannot become +15). Stock from other sources (e.g. 50 pieces from a partner's pack) must be booked as a sample entry with its own batch/expiry.
- Capture timestamp may be in the past (e.g. count during a care-home visit written on paper and entered later); the system computes today's stock from the counted value minus doses since then.
- Fields: dispensed quantity + unit, packs, correction from (current rest), to (new value), reason (e.g. loss, home visit), capture timestamp.
4.27 Blister information [GENERIC]
- Blister information of a blistered medication can be viewed from course details and from the blistering module tabs (creation, production, control (optional), archive).
4.28 Medication overview (Medikationsübersicht) [GENERIC]
- Tabular list of all medications and courses (same data as the contact page "Medikationsplan"). Covers known medications added manually and the pharmacy's own dispensings (maintained automatically).
- Which medication represents a course: none in period -> course not shown; period includes today -> the current medication if any, else the last in the period; period excludes today -> the last medication in the period.
- Columns (configurable): selection checkbox (used only for stop create/edit/delete); last-dispensing type icon (normal sale, statutory Rx, private Rx, green Rx, narcotic Rx, external procurement, sample; separate icon sets for single medications and courses); start with the markers from 4.21; substance; strength; article/dosage form; long-term; stop icons (clickable, tooltip lists stops); info-text marker; blister icon / "dosage not yet released for blistering" (optional, off by default); drug-related problem open/closed; production stock; dosage short form; therapy doctor; expiry and batch; number of medications in the course; stock; prescription-request rule/status icon (automatic rule active; manually excluded until a date; manually forced into the next request; currently on a request); range.
- Highlighting: long-term medications whose range is reached or exceeded = red; range reached within the next 5 days = yellow.
- Inactive courses group: aborted courses stay there for 3 months after the abort start; paused courses while the pause runs.
- Info area: articles prescribed for the medication; stock-keeping articles bold; articles of inactive courses grey bold.
- Functions: delete additional row / compounded preparation / free-text row; delete course (only if it has exactly one medication); delete medication (course has several); filter; create / edit stop; open drug-database info; details; print (federal plan, medication plan, range list); toggle info area; enter sample; select all; mark as long-term; hand over to till (opens course details, then puts the article into a sale, with the customer already assigned when started from contact management); CAVE check (opens risk overview if a risk exists in the period); interaction check; configure table / info area.
4.29 Medication profile (Medikationsprofil) [GENERIC]
- Gantt-like chart of courses for the filter period (default past and next three months).
- Vertical axis: first 5 characters of the product group key; follow-up medications matching on those characters are grouped in one row, labelled with the last prescribed article (predecessors in tooltip). Horizontal axis: time. Zoom per axis.
- Bars: solid blue = long-term; hatched blue = not long-term; "M" = sample entry; orange marker = pharmaceutically relevant change (product changed, e.g. generic switch, or dosage changed; a pack-size change does not count); red hatched = abort (up to the range end of the last aborted follow-up medication); orange bar = pause; black marker = dispensing time (missing = ordered but not collected). Tooltip on sections shows the article.
4.30 Health behaviour and measurements [GENERIC]
- Behaviour: smoker, healthy diet, physically active (pick lists); creatinine value (help states max 3 digits with 2 decimals); other (free text).
- Measurements by tab, each with date and time: body (height, weight, BMI computed), blood pressure (systolic, diastolic, pulse), blood glucose, blood lipids (total, HDL, LDL, triglycerides). Cells editable; rows deletable.
4.31 Drug-related problem documentation (Problemdoku) [GENERIC]
- New problem: pick the medicine from a drug database search (prefilled "*" = whole database; partial terms allowed); enter problem code (P-code) and intervention code (I-code) from pick lists plus notes; save.
- Status flow: recorded -> in progress (e.g. doctor being contacted) -> closed (result code (E-code) and result remarks documented). Closed problems are no longer counted on the MM overview. A processing-history window shows the trail.
4.32 Subjective impression (counselling notes) [GENERIC]
- List of notes with date, time, employee, subject. New note prefilled with now, can be backdated; free text on the customer's state.
4.33 Analysis (Analyse) [GENERIC]
- Tabs: risk checks and measurement analysis; header shows the contact, switchable among contacts from the last contact search.
- Risk-check tab: period/filter from the medication filter, initially 3 months before to 3 months after today. Rows: sale-type icon (normal sale, statutory Rx, private Rx, green Rx, narcotic Rx, care aids, cancelled variants, special external procurement), medication start, end, article short name, dosage form, product group key, long-term icon. Untick medications to exclude (mark/unmark all), then run the CAVE check (customer-related risk overview if risks) or the interaction check over the selected set. The hit count per medicine can show all interactions known for it in the database (e.g. quetiapine with 19 others) versus only those among this patient's medications.
- Measurement analysis: values entered under objective impression -> behaviour/measurements, shown as table or chart, with period filter. Groups: body (BMI line, dashed min/max norm), blood pressure (systolic blue, diastolic red, pulse green as separate toggleable series; dashed upper norm limit), blood glucose (line; dashed min/max norm), blood lipids (total cholesterol blue and LDL green and triglycerides orange, each with an upper limit; HDL red with a lower limit; toggleable).
- Filters: measurement filter: relative (within the past N units) or absolute from/to. Medication filter (used by overview, profile, risk checks): relative (past N + coming N) or absolute; scope: include as-needed; only long-term; only product group X; only medications in a dosing system (card blister/box). The last three combine with AND.
4.34 Plan page (medication plan and weekly plan tabs) [GENERIC]
- Initially shows all medications of the coming week including today, including as-needed.
- Medication-plan tab: article; substance (or equivalent substance) for which a dosage is valid in the period; dosage-form code; dosage scheme; use and storage hints; dosing-system icon; icon when the medication starts within or ends outside the period or contains a stop (tooltip with dates); abort/pause icon.
- Weekly-plan tab: article; dosage form; unit (pack quantity + unit); dosing of the day; additional info; range. Long-term medications with stock 0 shown as red rows.
- Print medication plan (dialog) or weekly plan (preview of what is shown).
4.35 Care-home and blistering page (Heim/Verblisterung) [GENERIC]
- MM integrates care-home supply and manual blistering. The page shows the customer's home and home unit and the supply/blister-relevant data.
- Tab requests/lists (needs licence "Medikationsmanagement Heim"): stock list, range list, prescription request (separate module), weekly plan. Range lists also work with the plain MM licence for single home customers and their unit.
- Deceased or inactive patients are not printed on stock list, range list, prescription request or weekly plan (customer or home level). At customer level, range list and prescription request print a patient header without medicines (for documentation). To print anyway, set status active and adjust medication end dates manually.
- Change home unit (Heimeinheit ändern): in the print settings of range list, prescription request and "prescription request for medications without doctor assignment", choose a unit from the home tree; only when the customer belongs to a home.
- Tip: time-controlled message texts on contacts for reminders.
(Medication printouts — federal medication plan, own medication plan, weekly plan, range list — are described in section 10.)
4D. eHealth / Telematikinfrastruktur services (E-Health) [DE-SPECIFIC]
General idea underneath: integration with a national health-data network through certified hardware (gateway, card readers, institution and professional smart cards), with self-service diagnostics, guided card lifecycle, outage fallbacks and automated statutory reporting.
4.36 eHealth module overview [DE-SPECIFIC]
- Through the TI the pharmacy uses the electronic medication plan (eMP) and emergency data management (NFDM). Reading the patient's eGK yields insured master data (VSD), emergency data (NFD) and the eMP if stored on the card.
- Part of the vendor's "TI package"; usable once all TI components work. Module lives in the counselling menu.
- Initial hardware configuration by vendor staff; system settings (system scope, page "Gematik Konnektor") hold connector and card-terminal assignment per workstation; the module's configuration page shows component status and technical data.
- Functions: read customer data from the eGK at the till and reconcile with stored data; print emergency data; edit eGK PINs; SMC-B unlock/verify; power-cycle terminal; activate eHBA and change/unlock its PINs; AMTS consent; error detection; logs; reports; card swaps; routing; NNF reports; directory transfer.
- Error signalling: connector malfunction or unavailable SMC-B is signalled by a menu icon (lightning) at all workstations with a tooltip naming the cause; clicking opens the protocol page. Workstation-specific errors (e.g. reading an eGK) are shown at that workstation and logged. On TI problems an automatic task also appears in the KIM messages; user should check the TI and restart the connector.
- Generic idea: health-card based patient identification and consent; central status icon.
4.37 Read customer data from the eGK at the till [DE-SPECIFIC]
- Customer may insert the card. PIN entry by the customer is needed to read emergency data or the eMP and to write to the card (consent, medication plan); instructions appear on the terminal.
- Menu icon shows an inserted eGK, plus NFD and eMP badges if these were already read from that card; the menu lists the possible actions.
- "Read customer data": if the customer exists without deviations, it is assigned to the sale
directly (at the till). If unknown or different, the "adopt customer data" window opens:
- new customer: card fields shown green; edit if needed; "create as customer"; optional "print consent declaration" (for storing personal and care-relevant data); save;
- existing with differences: differing fields red, matching green, missing-in-system yellow; warning to verify it is the same person; adopt single fields or all; edit; save -> contact updated.
- Idea underneath: identify the patient from an authoritative card/ID and reconcile with the local record field by field.
4.38 Emergency data print (NFD) [DE-SPECIFIC]
- Doctors store emergency data on the eGK (conditions, medication, allergies) for emergency care.
- Print from the till eGK menu ("print emergency data") or from the module's print function; the customer is prompted for the PIN (always required for NFD).
- Printout: patient name, birth date, date of last update; sections medication (current), patient (contact data), doctors (treating doctors' contacts), diagnoses, allergies, special notes from providers.
4.39 eGK PIN management [DE-SPECIFIC]
- Change insured PIN (old, then new); unlock insured PIN keeping the old PIN (PUK); unlock with a new PIN (PUK); deactivate the PIN for the eMP/AMTS application only (other applications unaffected; generation 2.1 cards only); re-activate it (gen 2.1); change representative PIN (after insured PIN); unlock representative PIN (via insured PIN, then new representative PIN).
- Emergency data display always requires the insured PIN and this cannot be switched off.
4.40 AMTS consent (Einwilligungserklärung) [DE-SPECIFIC]
- Given once by the insured person personally (not a representative); may be verbal; recorded on the eGK and in the system (contact consent management and eHealth module) with date and the name/address of the provider where it was given.
- Required before eMP/AMTS data may be stored on the eGK; the user is alerted when attempting such an action without it and can write it directly ("write consent to eGK").
- Revocation: "delete consent incl. eMP/AMTS data" removes both the data and the consent from the card; the customer confirms at the terminal.
- Idea underneath: patient-controlled consent bound to the data carrier, with revocation that deletes the data.
4.41 Institution card (SMC-B) verify and unlock [DE-SPECIFIC]
- Verify: status "not yet verified" after the PIN was changed or unlocked, a network interruption between terminal and connector, terminal power loss / restart, or loss of the connection to the pharmacy system (e.g. server restart). The terminal must show its PIN-entry ("noise") display, otherwise power-cycle it; enter the 6-8 digit SMC-B PIN; check status "Verifiziert" in the module.
- Unlock: status "locked". Needs the PIN letter with PUK; function "PIN (SMC-B) bearbeiten" -> "unlock SMC-B PIN (new PIN)"; enter PUK at the terminal, then the new 6-8 digit PIN twice; note it; then verify.
- Power-cycle terminal: status "not present" or terminal unresponsive, typically because a PIN entry was too slow and aborted. Unplug the power cable for about 5 seconds, plug in (terminal restarts and beeps), enter the SMC-B PIN when prompted, check "Verifiziert". Status "connection to connector interrupted" -> raise a support ticket.
4.42 Health professional card (eHBA) [DE-SPECIFIC]
- Needed for qualified electronic signatures on e-prescriptions, e.g. after changing a prescription or setting special codes.
- PIN letter: transport signature PIN (PIN.QES), transport card PIN (PIN.CH; unlocks other uses such as login and document decryption), activation code for the issuer portal. Card goes into slot 2 of the terminal.
- Steps: activate in the issuer portal; change PIN.QES via "PIN (HBA) bearbeiten" (transport PIN on the terminal, then personal 6-8 digit PIN twice); change PIN.CH similarly.
- Limits: 30 s per PIN entry (else aborted, may repeat); 3 wrong transport-PIN entries block the card irrevocably; after 3 wrong personal PINs unlock with PUK; a forgotten personal signature PIN requires a new card. Keep the eHBA in the terminal only when needed.
- Further functions: unlock PIN.QES (old PIN) with PUK; unlock PIN.CH (old PIN); unlock PIN.CH (new PIN).
4.43 Configuration and status page [DE-SPECIFIC]
- Shows connector setup and type line incl. firmware, card-terminal function check, Telematik-ID (may be needed for third-party software and portals), routing cooperation pharmacies, expiry dates of cards, status of the TI usage report to the NNF, status of private-Rx reports (last 3 months, errors red), pharmacy-directory data sent (date of last transfer; fields not maintained shown grey).
- Successful setup is indicated by SMC-B status "Verifiziert".
- Function groups: terminal (power-cycle), SMC-B (verify, unlock, change/unlock PIN, owner change FAQ, swap), gSMC-KT (swap), eGK (read, PINs), eMP (consent), eHBA, NNF (TI report, private Rx report), terminal redirection.
- Direct troubleshooting help: help videos launchable in the app and QR codes for mobile.
- Certificate expiry (SMC-B, SMC-K, gSMC-KT): expiry < 3 months -> date shown red and a reorder task at the workstation with the affected terminal, with an ordering link; < 1 month -> a swap task that launches the guided wizard.
4.44 Card swap wizards (SMC-B, gSMC-KT) [DE-SPECIFIC]
- gSMC-KT (terminal device card): swap task when expiry < 1 month; reorder task already 3 months before at the affected workstation. Wizard (from task or config page): choose the card if several; step-by-step screens showing workstation, slot and images; adapts to connector type, terminal type and TI setup (e.g. whether the terminal also holds the SMC-B). Only for terminals supplied by the vendor.
- SMC-B: same thresholds; can also be swapped at any time during validity; procedure differs from gSMC-KT; only supported when the TI was supplied by the vendor. Preconditions: compare old and new Telematik-ID (a different ID loses the existing KIM address; to keep it, contact the pharmacists' chamber); the new card must have been activated by the issuer, who informs the chamber, which enters the card in the directory — wait at least 3 working days after requesting activation. Kit: new card + transport PIN, new seal, pen, scissors, cloth and isopropanol for seal residue, a test eGK, microfibre cloth. About 10 minutes. Start from the task ("execute") or the config page ("SMC-B tauschen"); the wizard tells the user which workstation to move to and which slot to use.
- Idea underneath: proactive certificate-expiry monitoring with tiered tasks and guided replacement.
4.45 Connector sharing (IXOS.Routing) [DE-SPECIFIC]
- Purpose: keep accepting e-prescriptions when the own connector fails, by using the connector of an authorised partner IXOS pharmacy (partner, friendly or group pharmacy). Part of the resilience bundle "IXOS.Backup Pro". Works in both directions (a pharmacy can offer its connector to one or more others).
- Behaviour: the partner's connector only fetches the e-prescription from the central server; acknowledgement, qualified signature and billing are done later once the own SMC-B works. A notice appears on each routed fetch; a counter shows how many were routed. When the own connector works again, fetching reverts automatically.
- Setup: prerequisites: contractual exchange with at least one other IXOS pharmacy; the partner has entered the pharmacy in its eHealth module and the 2D code was scanned; user right "IXOS.Routing verwalten". Request: create a new data-processing agreement, fill in, send by e-mail or print and e-mail (PDF preview). Answer: partner fills and returns the agreement; the requesting side scans the agreement's 2D code; after refresh the partner appears in the list.
- Card-terminal redirection: when the TI connection is lost, the system offers (by message, or manually on the config page) to redirect card terminals to a partner so eGKs can still be read for e-prescriptions. It lists which terminals at which workstations are redirected to which partner, and which cannot be and why. Each terminal must confirm with OK in turn. When the connector reconnects, deactivation is offered. Only Cherry and ORGA terminals without an inserted SMC-B can be redirected.
- Idea underneath: peer failover for a mandatory network gateway, with legal agreement and deferred completion of the steps that need the own identity.
4.46 Internet fallback [GENERIC] (motivation [DE-SPECIFIC])
- Without internet no e-prescriptions can be accepted. Fallback: firewall appliance with two WAN ports; WAN1 = standard router (primary provider); WAN2 = fallback router on an independent connection, ideally a different technology (e.g. LTE).
- Recommendations (as of 15.03.2024): LTE home routers with pay-per-use (no monthly fee) or contract. Unsuitable: hybrid routers / backup products over which the TI does not work, or that need manual activation. Recommended setups switch automatically (always on standby).
- Covers only the pharmacy system LAN and its TI connection, not other devices.
- Installation: primary router on WAN1; DHCP active on the fallback router; the two routers must use different IP ranges (e.g. 192.168.1.0 vs 192.168.2.0); cable fallback router to WAN2; run the function test.
- Function test (outside business hours; repeat quarterly or half-yearly): scenario 1 — primary router off/defective/cable cut: firewall switches automatically; a web page should open within 30 s; TI works after a short delay; primary router's network unreachable; after restoring, up to 10 minutes for reconnect and automatic switch-back. Scenario 2 — primary router on but internet signal lost: same 30 s; router network stays reachable; automatic switch-back.
4.47 Protocols (logs) [GENERIC]
- Table sorted by date descending: date, action label, origin (IXOS, connector, NNF), workstation / terminal, operator. Filters: date range, category (success / error), origin (connector, IXOS, NNF, gematik). Details pane for the selected entry.
- Since July 2025 also the print history of the (former paper) NNF slip; reprint not possible because the paper deadline has passed.
4.48 Report: statutory Rx packs for terminal funding [DE-SPECIFIC]
- Reports module, result category pharmacies/branches, basic evaluations, query "TI Anzahl GKV Rx Packungen": number of prescription-only items dispensed on statutory insurance in a period (default last 4 quarters; period editable). Only an indicator for funding of additional card terminals, not binding.
4.49 Automated reports to the night and emergency service fund (NNF) [DE-SPECIFIC]
- TI usage report: since 01.04.2024 TI usage must be reported monthly to keep receiving the full TI flat-rate reimbursement. Automatic once a month when the pharmacy has a vendor TI licence and/or KIM addresses booked via the vendor; requires one-time acceptance of terms of use (module function "NNF TI Meldung"). Field "(last) NNF TI report" shows status/date.
- Private-Rx report: since July 2025 dispensings of prescription-only items to privately insured and self-paying customers are reported as an electronic dataset via the billing centre, replacing the printed self-declaration slip. Prerequisites: billing centre with valid credentials and working TI; otherwise the pharmacy must report itself. Sent automatically for all institution IDs (IK) stored (all must be registered with the billing centre), one hour after closing on the last working day of the month. Corrections and late reports only via the NNF portal in the month after the quarter change. Pre-check: report "Beiträge zum NNF" (sales category, revenue/gross-profit analyses; summary row, column sales quantity = packs in the period). Status of the last 3 months on the config page, errors red plus a task; details in the protocol filtered by category error and origin NNF.
- Idea underneath: scheduled, automatic statutory reporting with status monitoring and error tasks.
4.50 Pharmacy directory publishing (gematik Verzeichnisdienst) [DE-SPECIFIC]
- Pharmacy data relevant to patients go directly to the national app and insurer apps; transmitted automatically after each change of relevant data: opening hours, holidays, emergency duty, contact data, offered services (all stored information of these areas).
- Only if checkbox "Datenübertragung" on system settings page "Apothekenverzeichnis" is on; if off, the pharmacy disappears from the apps and digital assignment of e-prescriptions to it is impossible.
- Where maintained: opening hours and contact data in company master data; emergency duty and holidays in module "Feiertage & Notdienst"; services and directions on the directory settings page. Transfers traceable in the protocol (origin "gematik"); sent and unmaintained data visible on the config page.
- Idea underneath: push pharmacy profile changes automatically to a public directory/marketplace.
4.51 TI troubleshooting guide [DE-SPECIFIC]
| Status / message | Action |
|---|---|
| SMC-B locked | unlock SMC-B (4.41) |
| SMC-B not verified | verify SMC-B |
| SMC-B not present | power-cycle the card terminal |
| No TI connection / connection to connector interrupted | support ticket |
| Connector connected, TI interrupted | support ticket |
| Connector connected, TI interrupted, e-prescription server unreachable | support ticket |
| Third-party TI in use | contact own local TI service provider; read the third-party device docs |
5. Workflows
5.1 Sale with clinical checks at the till
- Assign the customer to the sale (or read the eGK, 5.6). If configured, KIa1B pops up with profile, open items and tasks; staff handle due tasks/questions.
- Capture all items. For the selected item, counselling pictograms/hints appear (Framm or ABDA).
- Indicators update: grey / black (general info available) / coloured ring (customer- or sale-specific risk, blinking).
- Open each blinking indicator (or use the risk-check chooser): customer CAVE, drug interactions, food interactions. Review hits, using classification, evidence, lead measure and the warning tab; optionally add diseases via "assign patient characteristics", filter, print for the patient or doctor, or run a comparison search for an alternative.
- If a risk was clarified with doctor/patient, document it (reason, optional expiry) so it shows blue in future sales.
- Switch to total. Any unreviewed blinking risk opens automatically and must be viewed.
- If the customer is in MM, each dispensed medicine triggers the duplicate check (5.3) and course details (5.2). Optionally the federal plan is printed after the sale.
- Close the sale.
5.2 Booking a dispensing into medication management
- Customer in MM is assigned; a medicine (not veterinary) is dispensed, delivered in advance, delivered as back-order, or entered as a sample.
- If a matching course exists (first 5 characters of product group key, or substance number for combinations, or different release type), the duplicate window opens first (5.3).
- Course details open (unless suppressed for an identical follow-up PZN/M2). Same substance, strength and dosage-form structure join the existing course automatically.
- Check/enter indication, therapy doctor (mandatory), long-term flag (mandatory), meal relation, dosage section (type, unit, times, quantities, valid-from). Use an alternative unit if prescribed in another unit.
- Save. The system computes therapy start, stock and range; labels can carry dosage and date.
- Cancelling skips the booking; it must be done later from sales data ("book medication").
5.3 Resolving a possible duplicate medication
- Window lists existing courses with matching group key and compares them to the new article.
- Choose: (a) switch now (abort old at a chosen time), (b) use up the old first (old is stopped; new starts after the longest range), or (c) accept parallel use.
- A stop record is created for (a)/(b). If the predecessor was dosed in an alternative unit, decide whether to keep that unit.
- Continue to course details.
5.4 Stopping, pausing and correcting
- From overview (tick courses) or course details create a stop: type, start, end (pause), reason (default inpatient stay), remark.
- Abort with reason inpatient stay can auto-create a customer message/info.
- Later edit: add/remove courses, change dates, delete the stop.
- When counted stock differs, open the dispensing in course details and book a stock correction with the count time; stock from other sources is entered as a sample.
5.5 Medication review / counselling session
- Open MM overview: activities (last/next counselling), allergies, diseases, open problems.
- Objective impression: review the medication overview and profile; record behaviour and measurements; document drug-related problems with P/I codes and follow up to closure with an E-code.
- Analysis: select the medications in the period and run CAVE and interaction checks over the whole regimen; review measurement charts against norm lines.
- Subjective impression: write a counselling note.
- Print the federal medication plan / own plan for the patient; set the next counselling date.
5.6 Reading the health card at the till
- Customer inserts the eGK; the menu icon shows the card (and NFD/eMP badges if already read).
- "Read customer data": known and identical -> assigned to the sale; otherwise reconcile field by field or create the customer, optionally printing the data-storage consent.
- Optional: print emergency data (patient PIN), write/revoke AMTS consent, change/unlock PINs.
5.7 Enrolling a patient in MM
- Contact -> MM page -> tick MM; fill general care data and doctors.
- If no consent is on file: print consent form, customer countersigns, record date.
- Open advanced functions; enter known medications (samples / dosage-only), CAVE data, measurements.
5.8 Care-home supply cycle
- Residents are assigned to a home and unit; their medications are in MM, with long-term flags and dosages.
- Print range list (by home/unit, period, grouping by customer/doctor/home level) to see what runs out; trigger prescription requests to therapy doctors.
- Print weekly plans for administration sign-off by staff, and medication plans grouped by type so staff see what must be set up.
- Record counted stocks from home visits as backdated stock corrections.
5.9 TI fault handling
- Lightning icon / KIM task signals a problem; open configuration page.
- Read SMC-B status: locked -> unlock with PUK; not verified -> enter PIN at terminal; not present -> power-cycle the terminal and verify; connection errors -> support ticket.
- If the connector is down: e-prescriptions are fetched via a routing partner; accept the offer to redirect card terminals; when the connector returns, deactivate redirection; deferred acknowledgement, signature and billing complete with the own SMC-B.
- If the internet is down, the firewall switches to the fallback line within about 30 s.
5.10 Card expiry
- 3 months before expiry: date red, reorder task with ordering link at the affected workstation.
- For SMC-B: request activation of the new card, wait at least 3 working days, compare Telematik-IDs.
- Under 1 month: swap task; run the wizard (from task or config page), follow the workstation/slot instructions, verify with a test eGK.
6. Business rules and calculations
- Indicator priority (CAVE): red (action mandatory) > orange (check required / cross-allergy)
yellow (atypical) ; blue = documented; grey = none; "?" = data missing (age/sex, extended check only); warning triangle = extended check active but weight or renal function missing.
- Interaction ring colour = most severe customer-related class; grey ring for product-specific warning, no interaction expected, no statement possible.
- Interaction sort order: severity descending. General hits merged per substance group; customer-related hits listed individually.
- Look-back for customer history: default 100 days, range 1-999 days; includes own sales, connected branches and partner pharmacies, eML history and active eMP entries.
- Forced review: unreviewed blinking risks open automatically before the total / before delivery-note creation in Faktura (latter suppressible).
- Business customers: no drug interaction check. Walk-in and business customers: no CAVE.
- Documentation expiry: after the expiry date the warning returns (blinking); the record is retained and can be reactivated.
- Course grouping: same substance + strength + dosage-form structure -> same course; split max into two courses.
- Duplicate rule: parallel substances with identical first 5 characters of the ABDA product group key; combination products compared by substance number; identical combination products (same substances, strengths, product group) are not duplicates; different release type also triggers the window.
- Stock computation: current total stock = sum over dispensings of (quantity - doses taken since start per dosing sections) excluding "do not use remaining stock"; range = date stock reaches 0. No computation for as-needed or free dosing. Stock "?" when no article, mixed dosage forms, mixed M2 numbers without carry-over, or as-needed/free dosing.
- Dose edits: new dosage = new section (history kept); edit = retroactive recalculation.
- Pause extends the medication's duration by the pause length; abort ends it incl. follow-ups.
- Stock correction cap: cannot add back more than was deducted from that pack; not possible when rest = 0; backdated count -> today's stock = count - doses since count time.
- Default time slots: fasting 06:00, morning 08:00, noon 12:00, evening 18:00, night 21:00; clock mode presets 06, 08, 10, 12, 15, 18, 21 h; up to 5 / 10 administrations per day.
- Long-term flag effects: listed on plans even with stock 0 (red); non-long-term disappear after range end; non-flagged courses count as as-needed for the federal plan.
- Overview highlighting: long-term range reached/exceeded red; within 5 days yellow.
- Inactive courses: aborted courses visible in the inactive group for 3 months after abort start; paused while paused.
- Profile change marker: product change or dosage change counts as a relevant change; pack size change does not.
- Federal plan rules: covers now + 28 days; later starts omitted; pauses starting/ending within 28 days printed "pause from / until"; dosage > 20 characters -> "see hints" and dosage in hints; hints 0-80 characters, if insufficient an additional free-text row carries the dosage ("see additional row"); hints > 80 characters truncated with "..."; more than 3 substances -> "combination product"; consecutive same-M2 medications merged into one row; dosage or manufacturer change within the 28-day window creates a new row; as-needed with range reached in 28 days -> "until DD.MM.YY"; start within 28 days -> "from ..."; stop icon only when plan and system agree or the abort started within the last 3 months; as-needed with stock 0 excluded, as-needed without article ("?") included; long-term without dosage printed with "no dosage"; first name mandatory.
- Range list / medication-plan "stock 0" options: include long-term or blister articles for which the customer has had no stock and no successor for at most 3 months.
- Deceased / inactive patients excluded from home lists and plans.
- Initial periods: analysis 3 months back to 3 months ahead; profile past/next 3 months; plan page coming week incl. today; range list coming 14 days; weekly plan 8 or 14 days (help inconsistent); KIa1B history 24 months back; Rx-pack report last 4 quarters.
- Certificate thresholds: < 3 months red + reorder task; < 1 month swap task.
- PIN rules: SMC-B and eHBA personal PINs 6-8 digits; eHBA PIN entry times out after 30 s; 3 wrong transport PINs block eHBA permanently; 3 wrong personal PINs -> PUK.
- Internet fallback: switch within about 30 s; switch-back up to 10 minutes after restore.
- NNF private Rx: sent 1 hour after closing on the last working day of the month.
7. Configuration and settings
| Parameter | Scope | Effect | Default |
|---|---|---|---|
| Anzahl Tage Prüfung (till, page Interaktionen) | system | Look-back days for customer-history interaction check (1-999) | 100 |
| Interaktions-Icons blinkend anzeigen | till | Blinking ring as amplification for customer-related interactions | not stated |
| Kundenbezogene Interaktionen mit 'Kunde fehlt' (till, page Hinweise/Abfragen) | workstation | Banner/notice for interactions with partners in subtotals without customer | active |
| Kundenbezogene Risiko-Checks durchführen (Faktura, page Allgemeines zum Abverkauf) | workstation | Auto-popup of risk checks when finishing an invoice order | not stated (popup implied on) |
| Anzeige (till, page Hinweistexte) | workstation | Hint source at till: Framm dosing hints or ABDA standard hints | Framm |
| Standardhinweise selection (drug-database module settings) | system | Which ABDA standard hints are shown | vendor preselection |
| CAVE check active / extended CAVE check (contact, Risk management) | customer | Enables CAVE; extended adds weight/renal checks | not stated |
| N-Ident consent (company master, page securPharm) | pharmacy | Required once for certified check engine | — |
| Kundeninfo auf einen Blick aktivieren | system | Enables KIa1B | off |
| Kundeninfo auf einen Blick automatisch anzeigen | workstation | Conditions for auto-popup on customer assignment | not stated |
| Kundeninfo auf einen Blick (default view) | workstation | Normal or back-office view; also default for care-home customers | not stated |
| Offene Posten aufblenden | not stated | Show open items in KIa1B | not stated |
| Med.-Details bei gleicher Medikation ausblenden | not stated | Skip course details for identical follow-up PZN/M2 | not stated |
| Info bei Med.-Abbruch Grund 'station. Aufenthalt' | not stated | Auto-create message/KIA info on abort for inpatient stay | not stated |
| Bundesmedikationsplan (contact MM page) | customer | Offer federal plan print after each sale | not stated |
| Medication plan criteria "save as default" | user/system (not stated) | Persist plan print criteria | — |
| Medication filter / measurement filter | per view | Period and scope for overview, profile, risk checks, charts | see section 6 |
| Gematik Konnektor (system settings) | system | Connector and terminal assignment per workstation | set by vendor |
| Datenübertragung (system settings, page Apothekenverzeichnis) | system | Push pharmacy data to national directory | not stated |
| NNF TI report terms accepted (eHealth module) | pharmacy | Enables monthly automatic TI usage report | not accepted until done |
| Billing centre credentials | pharmacy | Prerequisite for electronic private-Rx NNF report | — |
| BMP preview window | not stated | Preview before printing the federal plan | configurable |
8. Roles and permissions
- User right "IXOS.Routing verwalten" is needed to manage connector-sharing partners.
- Initial eHealth hardware configuration is done by vendor staff only.
- Card actions need the respective PIN/PUK holders: the patient for eGK PINs, consent and emergency-data reading (insured person in person; a representative cannot give AMTS consent); the pharmacist for the eHBA; the pharmacy's PIN letter holder for the SMC-B.
- Licences: MM (add-on), MM care home ("Medikationsmanagement Heim"), blister management (production stock), CAVE (add-on), Framm drug profiles (add-on), "IXOS.Kunde" (KIa1B), vendor TI package / TI licence. Restricted federal-plan / eMP functions are licence-free.
- Editors and timestamps are recorded on documentation entries, dosing sections, stops, counselling notes and protocol entries.
- No other role restrictions are described in these pages.
9. Integrations, hardware and external services
9.1 Clinical content and check engines
- Certified check engine "MediCheck Connect" (external, EU MDR-certified medical-device
software): performs the customer-specific CAVE check and the customer-specific / patient-
individual interaction check; its till windows are titled "MediCheck Quick - CAVE" and
"MediCheck Quick - Interaktionen". Interaction summary texts come from this provider; the
operator's contact details are reachable via the "labelling" (Kennzeichnung) function.
Authentication: one-time consent to "N-Ident" based on the pharmacy's securPharm certificate
(company master data, page securPharm).
[DE-SPECIFIC]mechanism; idea underneath: outsource regulated clinical decision support to a certified engine and authenticate the pharmacy to it. - German drug database (ABDA / ABDATA) supplies: the general CAVE risks per finished medicine, interaction monographs (interaction number, classification, evidence, lead measure, source rating, literature), food interactions, the product group key (WGS) used for duplicate detection and the medication-profile axis, substance numbers (combination products), M2 numbers (same-medication logic), dosage-form structure (course grouping), release type (modified-release comparison), manufacturer-reported alternative dosing units, the "A" assortment flag, standard counselling hints, and the base info opened from overviews.
- Dr. Framm drug profiles and dosing hints: paid third-party content (pictograms and drug profiles) shown at the till.
9.2 Patient data sources for the checks
- Own sales history on the customer card; sales of connected branch pharmacies (Filialapotheken, with branch code shown on hits) and partner pharmacies within the look-back window.
- eML (electronic medication list, server-side history of e-prescription dispensings) and active eMP entries feed the customer-related interaction check; the eML and the ePA (electronic patient record) can be opened from the CAVE / interaction windows.
- Family members' data exchanged between branch/partner pharmacies appear in KIa1B (only exchanged family members).
- Customer communication channels shown in KIa1B history: the pharmacy's customer app ("Meine Apotheke") and e-mail.
- Federal medication plan: general plan hints and dosage changes coming from the doctor's software are shown (rows changed by the doctor but not yet accepted in the pharmacy carry an icon). How the plan is imported is not described on these pages.
9.3 Telematikinfrastruktur hardware and services [DE-SPECIFIC]
Idea underneath: a national, certificate-secured health network reached through a hardware gateway, with smart cards identifying the institution, the professional, the device and the patient.
| Component | Role in these pages |
|---|---|
| Connector (Konnektor) with SMC-K | Gateway into the TI; type line and firmware shown on the config page; assigned per workstation in system settings page "Gematik Konnektor"; SMC-K certificate expiry monitored. |
| Card terminals (Kartenterminal) with gSMC-KT | PIN pad readers at workstations; slot numbering matters (eHBA goes into slot 2); gSMC-KT certificate expiry monitored; power-cycle procedure; redirection to a partner's connector supported only for Cherry and ORGA terminals without an inserted SMC-B; swap wizards only for vendor-supplied terminals. |
| SMC-B (institution card) | Identifies the pharmacy; must be verified with a 6-8 digit PIN; PUK in the PIN letter; carries the Telematik-ID (tied to the KIM address); swap only when the TI was supplied by the vendor. |
| eHBA (health professional card) | Pharmacist's card for qualified electronic signatures; PIN.QES and PIN.CH; activated in the issuer's portal. |
| eGK (patient health card) | Insured master data, emergency data, eMP/AMTS data, AMTS consent; insured and representative PINs; generation 2.1 cards allow switching the eMP/AMTS PIN on/off. |
| Test eGK | Used to check the setup after an SMC-B swap. |
| E-prescription server | Central server from which e-prescriptions are fetched (routing fetches through a partner's connector when the own one fails). |
| KIM | Secure TI messaging; automatic tasks on TI problems appear there; KIM address bound to the Telematik-ID. |
| Card issuer and pharmacists' chamber | Activate new SMC-B / eHBA, enter the card in the directory; chamber is contacted to keep a KIM address when the Telematik-ID changes. |
| gematik directory service | Receives pharmacy profile data (opening hours, holidays, emergency duty, contact data, services, directions) for the national app and insurer apps. |
| NNF (night and emergency service fund) | Receives the monthly TI usage report and the monthly private-Rx dataset; NNF portal for corrections. |
| Billing centre (Rechenzentrum) | Transmits the private-Rx dataset to the NNF; needs valid credentials and all institution IDs (IK) registered. |
9.4 Network and support
- Internet fallback: firewall appliance with two WAN ports, primary router on WAN1 and a
fallback router (ideally LTE, independent line) on WAN2; automatic switch within about 30 s;
switch-back up to 10 minutes after restore (details in 4.46).
[GENERIC] - Support: connection errors (no TI connection, TI interrupted, e-prescription server unreachable) go to the vendor's support ticket channel (IXOS.eCall). Pharmacies with third-party TI contact their own local TI service provider (DVO). Help videos open from the configuration window and QR codes link to them on a mobile device.
- Vendor bundles: "TI package" (eHealth module), "IXOS.Backup Pro" (routing + internet fallback), vendor TI licence and/or KIM addresses (precondition for the automatic NNF TI report).
9.5 Printing hardware
- Customer and care-home labels carry dispensing date and dosage information from MM.
- Printouts go through the standard print preview with "print" or "send"; the NFD and federal plan use the same mechanism.
10. Printouts, reports and exports
10.1 Clinical-check printouts at the till
- CAVE printout — see 4.6 (overview or details, category selection, grouping by risk type or medicine, optional customer CAVE data, found risks pre-ticked).
- Interaction printout — see 4.14 (addressee customer or doctor, diseases, selected or all interactions, info blocks, copies, sale date for partners from earlier purchases; can become very long).
10.2 Federal medication plan (Bundesmedikationsplan, BMP; also "AMTS plan") [DE-SPECIFIC]
Idea underneath: a standardised, portable patient medication plan with fixed column rules that any provider can read and update.
- Standard: follows the official specification of the patient-related medication plan (national coordination group for medication-therapy safety).
- Time window: always printed for "now"; contains medications up to 4 weeks (28 days) ahead. Medications starting later than 28 days are not shown. Pauses that start or end within the 28 days are printed as "pause from" / "pause until".
- Where from: contact search / contact details / home structure; contact details page Medikationsplan; MM medication overview; MM page Plan. If the contact option "Bundesmedikationsplan" (contact's MM page) is on, printing is offered automatically after each sale. A configurable preview window can be shown before printing. A plan without medication data can be printed for an MM customer as a blank form for handwritten entries.
- Prerequisites: long-term flag must be set: the window "complete missing data" (Fehlende Angaben ergänzen) lists courses without it. A course not flagged long-term counts as as-needed and is not printed when its stock is 0. The patient's first name is mandatory on the BMP; the user is prompted if the contact lacks it.
- Header: customer name and details; patient parameters if stored, each selectable for print: allergies/intolerances, sex, weight, height, creatinine value, flags breastfeeding, pregnant, other.
- Row types: medication rows; compounded-preparation rows (Rezepturzeilen — in the in-app overview always under a separate "Rezeptur" heading; in preview/print under whatever heading the doctor set, or none); free-text rows (general patient hint); additional row (Zusatzzeile, bound to a medication or compound); compound free-text row; user-defined sub-headings (Zwischenüberschriften) to split the plan into blocks such as long-term, as-needed and self-medication. Rows can be moved up/down; print order = list order. General plan hints from the doctor's software appear below the list; once moved they become free-text rows. New rows can be added for each non-medication type; all rows except medication rows can be deleted. Plan hint (Planhinweis) and deviating free texts (Abweichende Freitexte) are maintained in the same dialog; "save & print".
- Columns: substance ("Kombi-Präp." when more than 3 substances); strength; article / dosage form (if no article, the dosage form of the course-forming PZN); dosing morning / noon / evening / night; unit (from the BMP keyword list of dosing units); hints / info text; reason (from the course's indication); long-term icon; stop icon (pause/abort; only shown when plan and system agree, or when the abort started not more than 3 months ago); icon "changes by the doctor not yet confirmed in the pharmacy"; per-row print toggle. Medications whose free texts deviate (also added info for self-created articles) are shown red with a tooltip explaining the deviation and how to change it.
- Inclusion rules: long-term courses without dosage (e.g. a substance prescription by the doctor) are printed regardless of stock with "Keine Dosierung" in the dosing column; long-term with dosage but no stock is printed without remark (the patient may still have stock, e.g. doctor's samples); as-needed with stock 0 (range reached) is excluded from preview and print; as-needed without article (stock "?") is shown and printable.
- Formatting rules: dosage (cycle or free) needing more than 20 characters -> dosing columns show "siehe Hinweise" and the dosage goes to the hints column. Hints column holds 0-80 characters; if it cannot hold the dosage plus other hints (limited validity, stops, info texts) a free-text row is inserted under the medication carrying only the dosage, and the dosing column shows "siehe Zusatzzeile". Hints longer than 80 characters are cut at the end with "...". Medications of a course with the same M2 number are merged into one row when chronologically consecutive; a change of dosage or manufacturer within the course inside the 28-day window creates a new row. As-needed medication whose range is reached within 28 days -> hint "bis DD.MM.YY"; therapy start (long-term or as-needed) within 28 days -> "ab ..."; the same applies to pauses, aborts and dosages that do not fit. Dosages can be shown in fraction notation (described elsewhere).
10.3 Pharmacy medication plan (Medikationsplan) [GENERIC]
- Criteria: intake period from..to; doctor (prescriber); prescriptions (include prescribed medications) with sub-options statutory (GKV), private, green prescriptions; normal sales; sample articles; blister articles With / Without / Only; as-needed With / Without / Only; long-term With / Without / Only; long-term with customer stock 0; print current-day customer stock (default: no stock column); sorting by doctor (alphabetical), article (alphabetical) or range (medication end ascending); group by medication type (separate tables with sub-headings for as-needed, long-term and blister articles — useful for care homes so staff see what must be set up). "Save as default" keeps the criteria for later calls.
- Order: courses alphabetical by the first article of the course (oldest therapy start); within a course by article name or range according to the setting.
- Layout content: a tablet image per position for visual verification; on multi-page plans the heading with customer name and period is repeated as footer on following pages.
- Where from: contact search / details; contact page Medikationsplan; MM medication overview; MM page Plan.
10.4 Weekly plan (Wochenplan) [GENERIC]
- Purpose: day-exact overview of intake-relevant information for upcoming medications, on which the patient at home or care-home staff sign off each administration.
- Non-home customers: print from MM page Plan, tab weekly plan; content = what the tab shows (controlled by the medication filter).
- Care-home context: from home details (page structure; selected home or unit) or MM page Heim/Verblisterung, tab requests/lists. Dialog: for customer (prefilled when started from MM) or for home unit (prefilled from the home contact); period from..to; scope: blister articles With / Without / Only; as-needed dosing With / Without / Only. Entries can be grouped and sorted.
- Defaults (help inconsistent): one statement says the initial period is today plus the next 8 days, the field description says the coming 14 days. Selection as written: all articles whose medication end lies after the start date and before the end date.
- Stock-0 rule: long-term medications with stock 0 (dosing units) appear as red rows in the on-screen weekly plan (tooltip "long-term medication with stock 0"); on the printed form the range date of such a medication is bold with an exclamation mark when the range date is exceeded within the chosen period.
10.5 Range list (Reichweitenliste) [GENERIC]
- Purpose: tell the pharmacy, the customer, care staff and treating doctors which follow-up medications are due. Needs the MM licence (not the home licence); for any MM customer, and for residents also for the whole home unit.
- Dialog: for customer / for home unit; period from..to (initially the coming 14 days; evaluates all articles whose medication end lies after the start and before the end date); scope: doctor (prescriber, typed or picked from contacts); prescriptions (GKV, private, green); normal sales; sample articles; blister articles With / Without / Only; "blister articles with customer stock 0" (includes those for which the customer has had no stock and no successor for at most 3 months); as-needed With / Without / Only; long-term With / Without / Only; "long-term with customer stock 0" (same 3-month rule); grouping by customer (alphabetical), doctor (alphabetical) or home level; sorting by customer, doctor, article (alphabetical) or range (medication end ascending); print current-day customer stock (default no stock column). Lists for several customers are sorted alphabetically by surname.
- Where from: residents: Heim/Verblisterung -> requests/lists; contact search / details; contact page Medikationsplan; MM medication overview; MM page Plan; home contact structure page. Home unit can be changed in the print settings (4.35).
10.6 Care-home lists
- Stock list (Bestandsliste), range list, prescription request (Rezeptanforderung, separate module; also a variant "prescription request for medications without doctor assignment") and weekly plan from MM page Heim/Verblisterung, tab requests/lists (licence "Medikationsmanagement Heim"), for a customer or a home / home unit. Deceased and inactive patients are left out (customer-level range list and prescription request print the patient header only).
10.7 Other MM outputs
- MM consent form (data storage of care-relevant data) for countersignature.
- Plan page prints: medication plan (via the dialog in 10.3) and weekly plan (preview of the displayed data, period per filter).
- Info text of a course can be printed on documents; the therapy doctor appears on overviews and printouts; the prescribing doctor is printed nowhere.
- Labels: dispensing date and dosage on customer and care-home labels.
- Measurement charts are on-screen (table or chart); no print is described.
10.8 eHealth outputs [DE-SPECIFIC]
- Emergency data printout (NFD): see 4.38 (patient PIN required; sections medication, patient, doctors, diagnoses, allergies, special notes; header with name, birth date, last update).
- Consent declaration for storing personal and care-relevant data, optional when creating a customer from eGK data.
- Data-processing agreement (Auftragsverarbeitungsvertrag) for routing partners: generated as PDF with preview, e-mailed or printed and e-mailed; carries a 2D code scanned by the requesting pharmacy.
- Report "TI Anzahl GKV Rx Packungen" (Reports module, category pharmacies/branches, basic evaluations): count of prescription-only packs dispensed on statutory insurance, default last 4 quarters; indicator only for terminal funding.
- Report "Beiträge zum NNF" (category sales, revenue/gross-profit analyses): pre-check of the private-Rx NNF report; summary row, column "Absatz" = packs in the period.
- Automatic electronic exports: monthly NNF TI usage report; monthly private-Rx dataset via the billing centre; pharmacy profile data to the gematik directory after each change.
- Protocol with filters; includes the print history of the former paper NNF slip (since July 2025; reprint not possible).
11. Dependencies on other modules
- Contact management (customers): risk management page (CAVE data, CAVE documentation, interaction documentation), MM page (enrolment, care data, federal-plan-after-sale option), consent management, contact page Medikationsplan, sales data (Verkaufsdaten: risk checks, book medication, enter sample), family relationships, classifications, statuses (deceased / inactive), delivery hints, message / info texts and hints.
- Contacts: care homes: home and home-unit structure, home contact details as print entry point.
- Till / sale: indicators, total window, subtotals, customer assignment, walk-in and business customers, hand-over of MM articles to a sale.
- Prescription sale / e-prescription: e-prescription dialog and prescription scan (KIa1B back-office auto-popup); e-prescription fetch, acknowledgement, QES and special codes (Sonderkennzeichen) depend on the TI cards and routing.
- Invoicing (Faktura): CAVE and interaction checks on order completion; KIa1B in Faktura; Faktura settings parameter for risk-check popup; Faktura message texts.
- Sales management: cancelling / editing sales with MM-booked articles triggers warnings.
- Open items (Offene Posten): back-order deliveries, missing prescriptions, pickup orders (release from / return to storage) shown in KIa1B; clearing a back-order pickup with MM articles triggers a warning.
- Customer information module (KIA infos, tasks, questions, campaigns): standardised items, priorities, recurrence, predefined answers, back-office flags; MM abort-reason automation creates KIA info / message text.
- Loyalty: personalised discount coupons and bonus account shown in KIa1B.
- Drug database module: article info, general CAVE, food/drug interactions, comparison search, drug profiles, standard-hint selection settings, base info.
- Prescription request module (Rezeptanforderung): uses therapy doctor, long-term flag and range; per-course request rule shown in the overview.
- Blister management module: production stock, blister info tabs (creation, production, control, archive), alternative unit passed to blister forms, dosage release for blistering, batch/expiry for manual blistering.
- Label printing: customer and care-home labels with dosage.
- Company master data: securPharm page (N-Ident consent), opening hours and contact data for the directory.
- Holidays & emergency duty module (Feiertage & Notdienst): directory data.
- System settings: till parameters, Faktura parameters, "Gematik Konnektor", pharmacy directory page.
- Reports module: TI Rx-pack report, NNF contributions report.
- Notes / task module and KIM: automatic tasks for certificate expiry, card swap, NNF errors, TI problems.
- Branch / partner pharmacy data exchange: sales history for interaction checks; family members in KIa1B; routing partners.
- User rights administration: right "IXOS.Routing verwalten".
- Customer app ("Meine Apotheke") and e-mail: communication entries in KIa1B history.
12. Portability notes
12.1 Generic (carry over directly)
- Point-of-sale safety checks: permanent risk indicators per category; grey / black / coloured ring / blue states; blinking until reviewed; forced review before payment or before delivery notes; recommended "capture everything, then check".
- Patient-characteristic checks (CAVE): sex, age, diseases, allergies, weight, renal function; colour priority (red mandatory > orange check > yellow atypical; blue documented); explicit "data missing" state so a silent pass is never mistaken for safety.
- Interaction checks: severity classes, direction, evidence level, lead measure, source rating; merge general hits, list customer hits individually; look-back window over the customer's history across branches/partners (default 100 days, 1-999); patient-individual weighting by diseases; food interactions as a separate view; per-run filters that reset.
- Risk documentation with expiry: clinician records the reason a known risk is acceptable; the warning is silenced for that customer until an optional expiry and then returns; reusable reason texts; adopt a reason across dosage forms/strengths of the same interaction.
- Alternative search constrained by the patient's risk factors.
- Counselling pictograms/hints per product at the point of sale, with a configurable source.
- Customer briefing panel (KIa1B): profile, open tasks/questions/open items, history, family view, back-office reduced view, auto-popup rules.
- Medication management: courses, dosing sections (daily, as-needed, free, weekly/monthly and N-week / N-day cycles; time-of-day or clock-time slots), computed patient stock and run-out date, long-term flag driving plans and refill requests, duplicate detection with three resolution options, pause/abort stops, stock corrections with backdated counts and an add-back cap, alternative dosing units, course splitting, overview / Gantt profile, red/yellow run-out highlighting, inactive-course grace period (3 months).
- Clinical documentation: drug-related problems with problem / intervention / outcome codes and a status flow; health behaviour and measurements with norm-line charts; counselling notes; written consent before storing care data.
- Care-home supply: range lists, weekly sign-off plans, medication plans grouped by type, stock lists, prescription requests per home unit; exclusion of deceased/inactive residents.
- Resilience and operations: dual-WAN internet fallback with tested automatic switchover; central component status icon with logs; proactive certificate/credential expiry tasks with guided replacement; automated scheduled regulatory reports with status and error tasks; automatic publishing of the pharmacy profile to public directories.
12.2 Germany-specific and the idea underneath
| German feature | Idea underneath |
|---|---|
| ABDA product group key (WGS), first 5 characters for duplicates | Use a hierarchical therapeutic classification (e.g. ATC level 4/5) to detect therapeutic duplicates; compare combination products by ingredient set. |
| M2 number, PZN | Product-family and pack identifiers to decide "same medication" and to merge plan rows. |
| ABDATA interaction / CAVE content; Dr. Framm pictograms | Licensed or locally curated drug-knowledge base with interactions, contraindications and counselling pictograms. |
| MediCheck Connect under EU MDR; N-Ident via securPharm certificate | Regulated decision-support engine kept as a separately certified component; authenticate the pharmacy to it. |
| Federal medication plan (BMP) with fixed column/character rules | A national or platform-wide standard medication-plan format (printable and machine-readable) with deterministic layout rules. |
| eGK reading (VSD, NFD, eMP), PINs, AMTS consent | Patient identification from an authoritative ID/card; patient-held emergency data and medication plan; patient-controlled consent with revocation that deletes the data. |
| eML / eMP / ePA | Central patient medication history and records feeding local checks. |
| TI connector, SMC-B, SMC-K, gSMC-KT, eHBA, QES | Institution / device / professional credentials for a national e-health network; professional digital signature on prescription changes. |
| IXOS.Routing via partner connector + data-processing agreement | Peer failover for a mandatory gateway between trusted pharmacies, under a written data-processing agreement, with deferred completion of identity-bound steps. |
| KIM messaging | Secure provider-to-provider messaging also used for system alerts. |
| NNF TI usage report and private-Rx dataset via billing centre | Scheduled automatic statutory reports with status display, error tasks and a pre-check report. |
| Report of statutory Rx packs for terminal funding | Volume-based indicator reports supporting subsidy claims. |
| gematik directory service | Publish opening hours, duty schedules, services and contact data to national patient apps so prescriptions can be routed to the pharmacy. |
| GKV / private / green / narcotic prescription icons | Sale-type taxonomy per payer and controlled-substance status. |
12.3 Notes for a Syrian deployment
- None of the TI infrastructure exists; the reusable parts are the patterns (credential expiry tasks, offline/fallback, status icon, directory publishing, peer failover) rather than the integrations.
- The clinical engine and content are the costly dependency: a local or licensed interaction / contraindication database is needed before the till checks have value; the UI and documentation logic are independent of the content source.
- Duplicate detection needs a classification code per product; ATC is the obvious substitute for the German product group key, but the "first 5 characters" rule would need re-validation.
- Offline-capable till: the help does not say how the checks behave without connection to the external engine (see open questions); a design should define a degraded mode explicitly.
13. Open questions
- Weekly plan default period: the help states both "today plus the next 8 days" and "the coming 14 days".
- Period selection rule for weekly plan and range list is written as "medication end after the start date and before the end date"; taken literally this excludes medications that continue past the period end. Intended semantics unclear.
- Creatinine field format: "max 3 digits in total with 2 decimals" as written; the unit is not stated.
- Emergency data PIN: the eGK PIN page says NFD display always needs the insured PIN and this cannot be switched off; the NFD page only says the customer is prompted. Whether exceptions exist (e.g. emergencies) is not described.
- Stock / range algorithm: exact computation (how cycles, pauses, alternative units, partial doses and time of day are counted; rounding of remaining quantities; time zone of the 06:00 / 08:00 ... slots) is not specified beyond the rules in section 6.
- CAVE risk generation: how risks are derived from coded diseases/allergies, which coding scheme is used, and what exactly the extended CAVE check adds beyond weight and renal function are not documented (performed by the external engine).
- Interaction documentation key: documented per customer and "these active substances" and linked to an interaction number; whether a new strength/dosage form inherits automatically or only by explicit adoption is only partly described (adoption is offered).
- Look-back data merging: how eML, eMP and branch/partner data are de-duplicated against own sales is not described.
- P-, I- and E-code catalogues for drug-related problems are not listed (the chapter calls them PCNE-style by inference only).
- Parameter scopes and defaults not stated: "Interaktions-Icons blinkend anzeigen", "Kundenbezogene Risiko-Checks durchführen" (default), "Kundeninfo auf einen Blick automatisch anzeigen" (possible conditions), "Offene Posten aufblenden", "Med.-Details bei gleicher Medikation ausblenden", "Info bei Med.-Abbruch Grund 'station. Aufenthalt'", BMP preview window, CAVE activation defaults.
- Offline behaviour: what the till shows when the certified check engine or drug database service is unreachable is not described.
- BMP import: how a doctor's federal plan (with general hints and doctor changes) gets into the system (e.g. scanning its 2D code) is not described on these pages, nor how the pharmacy accepts doctor changes.
- Prescription-request rules (automatic rule, exclude until date, force include) are shown in the overview but the rules themselves belong to another module.
- Roles: apart from the routing right, no permission model is given for documentation, deleting courses, editing dosages or clinical notes.
- KIa1B ordering of info items (beyond "high priority in bold") and the exact auto-popup conditions are not specified.
- Course split limit: "at most two courses" per existing course — whether a split course can be split again is not stated.
14. Source pages
- CAVE-Risiken im Total-Fenster anzeigen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/CAVE/cave_total.htm
- CAVE-Risiken im Kassenfenster anzeigen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/CAVE/cave_verkauf.htm
- CAVE-Check mit Vergleichssuche an der Kasse — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/CAVE/cave_verkauf_anzeigen_allg_kd_vgl_suche.htm
- Allgemeiner CAVE-Check — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/CAVE/cave_verkauf_anzeigen_allgemein.htm
- Kundenbezogener CAVE-Check — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/CAVE/cave_verkauf_anzeigen_kundenbezogen.htm
- Druck der CAVE Informationen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/CAVE/cave_verkauf_druck.htm
- Dokumentation eines kundenbezogenen CAVE-Risikos anlegen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/CAVE/cave_verkauf_kundenbezogen_doku.htm
- Verkaufs- und kundenbezogener Risiko-Check — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/CAVE/risiko-check_auswahl.htm
- Arzneimittelinformationen nach Dr. Framm im Kassenfenster anzeigen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/Framm_ABDA-Standardhinweise/framm_verkauf.htm
- Anzeige der Standardhinweise der ABDA-Datenbank im Kassenfenster — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/Framm_ABDA-Standardhinweise/standardhinweise-abda_verkauf.htm
- Interaktionsinformationen ausdrucken — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/Interaktionen/interaktionen_drucken.htm
- Interaktionen im Total-Fenster anzeigen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/Interaktionen/interaktionen_total.htm
- Interaktionen im Kassenfenster — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/Interaktionen/interaktionen_verkauf.htm
- Allgemeiner Interaktionscheck — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/Interaktionen/interaktionen_verkauf_anzeigen_allgemein.htm
- Kundenbezogener Interaktionscheck — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/Interaktionen/interaktionen_verkauf_anzeigen_kundenbezogen.htm
- Nahrungsmittelinteraktionen anzeigen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/Interaktionen/interaktionen_verkauf_anzeigen_nahrungsmittel.htm
- Filtereinstellungen für Interaktionscheck — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/Interaktionen/interaktionen_verkauf_filtereinstellungen.htm
- Dokumentation einer kundenbezogenen Interaktion anlegen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/Interaktionen/interaktionen_verkauf_kundenbezogen_doku.htm
- Aufgabe erledigen / Frage beantworten / Turnus überspringen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/KIa1B/Kundeninfo/aufgaben_erledigen.htm
- Kundeninfos verwalten — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/KIa1B/Kundeninfo/infos_verwalten.htm
- Notiz erstellen, bearbeiten oder löschen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/KIa1B/Kundeninfo/notiz_anlegen.htm
- Kundenindividuelle Texte anlegen, bearbeiten oder löschen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/KIa1B/Kundeninfo/texte_anlegen.htm
- Kundeninfo auf einen Blick (Backoffice-Ansicht) — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/KIa1B/kia1b_backoffice.htm
- Kundeninfo auf einen Blick — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT3_Verkauf/Kasse/KIa1B/kundeninfo_auf_einen_blick.htm
- Kunden ins Medikationsmanagement aufnehmen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/01_aufnehmen_%20in_medikationsmanag.htm
- Medikationsmanagement - Übersicht — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/01_medikationsmanag_uebersicht.htm
- Eingeben von Verlaufsdetails — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/Medikationsdetails/01_verlaufsdetails.htm
- Doppelmedikationen bearbeiten (Medikationsmanagement) — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/Medikationsdetails/doppelmedikation_bearbeiten.htm
- Eingeben einer alternativen Dosierungseinheit — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/Medikationsdetails/medikationsdetails_altern_einheit.htm
- Verlauf auftrennen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/Medikationsdetails/medikationsdetails_verlauf_auftrennen.htm
- Medikationsstopp anlegen und bearbeiten — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/Medikationsdetails/medikationsstopp.htm
- Bestandskorrekturbuchung vornehmen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/Medikationsdetails/verlaufsdetails_bestandskorrektur.htm
- Blisterinformation einsehen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/Medikationsdetails/verlaufsdetails_blisterinfo.htm
- Analysieren von Daten — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/analyse_daten.htm
- Analysieren von Messwerten — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/analyse_daten_messwerte.htm
- Festlegen von Filterkriterien für Messwerte — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/festlegen_filterkriterien_messwerte.htm
- Festlegen von Filterkriterien für Medikationen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/filterkriterien_medikationen.htm
- Heimeinheit ändern — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/heim_auswaehlen_drucken.htm
- Heim- und Verblisterungsdaten anzeigen und ausdrucken — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/heim_verblist.htm
- Wochenplan drucken — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/heim_verblist_wochenplan_drucken.htm
- Bundesmedikationsplan drucken — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/medik_drucken_bundesmedikationsplan.htm
- Medikationsplan drucken — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/medik_drucken_medikationsplan.htm
- Reichweitenliste drucken — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/medik_drucken_reichweitenliste.htm
- Medikationsprofil anzeigen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/medikationsprofil.htm
- Medikationsübersicht anzeigen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/medikationsuebersicht.htm
- Gesundheitsverhalten und Messwerte dokumentieren — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/obj_eindruck_gesundheitsverh_messwerte.htm
- Arzneimittelbezogenes Kundenproblem dokumentieren — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/obj_eindruck_problemdoku.htm
- Objektiver Eindruck — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/objektiver_eindruck_uebersicht.htm
- Medikations- und Wochenplan einsehen und ausdrucken — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/plan.htm
- Subjektiven Eindruck vom Kunden dokumentieren — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/Medikationsmanag/subjektiver_eindruck.htm
- Übersicht der E-Health-Funktionen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/01_ehealth_start.htm
- SMC-B-Karte entsperren — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_SMCB_karte_entsperren.htm
- SMC-B-Karte verifizieren — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_SMCB_karte_verifizieren.htm
- Internet-Fallback — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_backuppro.htm
- Versicherten-PIN und Vertreter-PIN der eGK ändern oder entsperren — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_eGK_PIN_bearbeit.htm
- eHBA aktivieren und PIN ändern oder entsperren — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_eHBA_PIN_bearbeit.htm
- Kundendaten mit der eGK einlesen und weitere Funktionen an der Kasse — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_egk_einlesen.htm
- AMTS – Einwilligungserklärung — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_einwilligungserklaerung.htm
- gSMC-KT-Karte austauschen (Installationsassistent) — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_gsmc-kt-tausch.htm
- IXOS.Routing — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_ixos_routing.htm
- Kartenterminal vom Strom trennen (stromlos machen) — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_kartenterminal_stromlos.htm
- Konfiguration und Kontrolle der E-Health-Komponenten — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_konfiguration.htm
- E-Health Notfalldaten ausdrucken — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_nfd.htm
- E-Health Protokolle — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_protokoll.htm
- Auswertungen erstellen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_reports.htm
- SMC-B-Karte austauschen — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_smc-b-tausch.htm
- Hilfe und Lösungen bei Problemen mit der TI (Telematik-Infrastruktur) — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ehealth_ti_probleme_hilfe_loesungen.htm
- PKV-Rx-Meldung an den Nacht- und Notdienstfonds — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/pkv_rx_meldung_nnf.htm
- TI-Meldung an den Nacht- und Notdienstfonds — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/ti-meldung_nnf.htm
- Übertragung von Apothekendaten an gematik-Verzeichnisdienst — https://ixos-onlinehilfe.pharmatechnik.de/Default/Content/PT4_Beratung/eHealth/uebertragung_verzeichnisdienst_gematik.htm